command link multifunction meter (square) - Yamaha Outboards
command link multifunction meter (square) - Yamaha Outboards
command link multifunction meter (square) - Yamaha Outboards
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Trip display<br />
When the engine start switch is turned to<br />
OFF, the last display shown is shown first<br />
when the engine start switch is turned to ON<br />
again.<br />
NOTE:<br />
Since “Display 1” and “Display 2” are the<br />
only default displays, other displays cannot<br />
be switched.<br />
To change the display configuration, see<br />
“Display (setting displays)” in “Changing<br />
settings (custom mode).”<br />
51<br />
Trip display (optional: speed sensor has<br />
been installed)<br />
TRIP shows the information from the speed<br />
sensor converted to the distance traveled.<br />
+ (1 second): To reset the distance<br />
traveled.<br />
NOTE:<br />
The distance traveled is affected by currents<br />
and other operating conditions and<br />
may differ from the actual distance traveled.<br />
You can select to show miles (M), nautical<br />
miles (NM), or kilo<strong>meter</strong>s (km) on the<br />
TRIP display. To change the displayed<br />
unit, see “UNIT (setting displayed units)”<br />
in “Changing settings (custom mode).”