command link multifunction meter (square) - Yamaha Outboards

More documents

Recommendations

Info

FUEL SENSOR (setting fuel sensor)/CALIBRATION (setting correction value) FUEL SENSOR (setting fuel sensor) You can set the fuel sensor type that is connected to this meter. 1. Turn the engine off and the engine start switch to ON. 2. (4 seconds): To activate the custom mode. 3. (2 times): Press to switch between the setting function names. 4. : To switch to the change settings display. 5. : Press to switch between the fuel sensor types. ABYC (US) EUROPE YAMAHA Blinks 6. (1 second): To change the fuel sensor type and return to the custom mode selection display. 7. (1 second): To return to the normal display. 61 CALIBRATION (setting correction value) You can calibrate the displayed fuel flow value within –7 to +7 percent. The difference in the fuel consumption display and the actual fuel consumption is calibrated. Checking the calibration value: 1. Operate the outboard motor on a full tank of fuel. 2. After operating the outboard motor, fill the fuel tank. Compare the amount of fuel filled into the fuel tank with the fuel consumed shown on the fuel consumption display and set the calibration value to the difference if necessary. Changing the calibration value: 1. Turn the engine off and the engine switch to ON. 2. (4 seconds): To activate the custom mode. 3. (3 times): Press to switch between the setting function names. 4. : To switch to the change settings display. 5. : Press to switch between the calibration values. Blinks 6. (1 second): To change the calibration value and return to the custom mode selection display.
7. (1 second): To return to the normal display. NOTE: The fuel flow display may differ depending on the operating conditions. When the fuel flow calibration value is changed, the FLOW, TTL, and ECON displays are shown calibrated. CALIBRATION (setting correction value) 62 Speed & Fuel meter unit
Page 1 and 2:
COMMAND LINK MULTIFUNCTION METER (S
Page 3 and 4:
The Command Link Multifunction Mete
Page 5 and 6:
Changing settings (custom mode) ...
Page 7 and 8:
Description 1 SET button 2 MODE but
Page 9 and 10:
Multifunction display The multifunc
Page 11 and 12:
Oil level display (2-stroke models)
Page 13 and 14:
Battery voltage display The battery
Page 15 and 16: Changing backlight settings/Adjusti
Page 17 and 18: MAINTENANCE (resetting maintenance
Page 19 and 20: 2. (4 seconds): To activate the cus
Page 21 and 22: One display: Display configuration
Page 23 and 24: Blink * In the display example, the
Page 25 and 26: Service functions Diagnosis You can
Page 27 and 28: 2. Speedometer unit NOTE: Depending
Page 29 and 30: Speedometer The speedometer shows t
Page 31 and 32: NOTE: Since “Display 1” is the
Page 33 and 34: System voltage display BATTERY or B
Page 35 and 36: NOTE: If no operations are carried
Page 37 and 38: UNIT (setting displayed units) You
Page 39 and 40: 3. Fuel management meter unit NOTE:
Page 41 and 42: Fuel flow meter The fuel flow meter
Page 43 and 44: NOTE: Since “Display 1” is the
Page 45 and 46: Remaining fuel display/Changing bac
Page 47 and 48: DISPLAY (setting displays) You can
Page 49 and 50: TTL You can select to show gallons
Page 51 and 52: 7. (1 second): To return to the nor
Page 53 and 54: Description 1 SET button 2 MODE but
Page 55 and 56: Fuel meter The fuel meter shows the
Page 57 and 58: Fuel economy display ECON shows the
Page 59 and 60: Depth display (optional: Triducer-m
Page 61 and 62: Changing settings (custom mode) Swi
Page 63 and 64: Changing the display configurations
Page 65: 6. : Press to switch between the di
Page 69: Setting the initial settings Before
show all

command link multifunction meter (square) - Yamaha Outboards

Create successful ePaper yourself

Delete template?

Save as template?