command link multifunction meter (square) - Yamaha Outboards

More documents

Recommendations

Info

UNIT (setting displayed units) 5. (1 second): To return to the normal display. 59 UNIT (setting displayed units) You can change the units that are shown in each display. 1. Turn the engine off and the engine start switch to ON. 2. (4 seconds): To activate the custom mode. 3. : To switch between the setting function names. 4. : To switch to the change settings display. 5. : Press to switch between the displays. Speedometer ( ) TRIP (trip) FLOW (fuel flow) ECON (fuel economy) TTL (total fuel consumption) TEMP (ambient water temperature) DPTH (depth) Blink * In the display example, the speedometer is shown.
6. : Press to switch between the displayed units. Speedometer You can select to show miles per hour (mph), kilometers per hour (km/h), or knots. The default setting is miles per hour (mph). TRIP You can select to show miles (M), nautical miles (NM), or kilometers (km). The default setting is miles (M). FLOW You can select to show gallons per hour (GPH) or liters per hour (l/h). The default setting is gallons per hour (GPH). ECON You can select to show miles per gallon (MPG), nautical miles per liter (NM/l), or kilometers per liter (km/l). The default setting is miles per gallon (MPG). TTL You can select to show gallons (G) or liters (L). The default setting is gallons (G). TEMP You can select to show Fahrenheit (°F) or Celsius (°C). The default setting is Fahrenheit (°F). DPTH You can select to show feet (F) or meters (m). The default setting is feet (F). 7. (1 second): To change the displayed units and return to the custom mode. 8. (1 second): To return to the normal display. UNIT (setting displayed units) 60 NOTE: When the speedometer unit settings are changed, the TRIP, FLOW, ECON, TTL, TEMP, and DPTH settings can be collectively changed automatically. To change the settings for each displayed unit individually, repeat steps 5 and 6. Speed & Fuel meter unit
Page 1 and 2:
COMMAND LINK MULTIFUNCTION METER (S
Page 3 and 4:
The Command Link Multifunction Mete
Page 5 and 6:
Changing settings (custom mode) ...
Page 7 and 8:
Description 1 SET button 2 MODE but
Page 9 and 10:
Multifunction display The multifunc
Page 11 and 12:
Oil level display (2-stroke models)
Page 13 and 14: Battery voltage display The battery
Page 15 and 16: Changing backlight settings/Adjusti
Page 17 and 18: MAINTENANCE (resetting maintenance
Page 19 and 20: 2. (4 seconds): To activate the cus
Page 21 and 22: One display: Display configuration
Page 23 and 24: Blink * In the display example, the
Page 25 and 26: Service functions Diagnosis You can
Page 27 and 28: 2. Speedometer unit NOTE: Depending
Page 29 and 30: Speedometer The speedometer shows t
Page 31 and 32: NOTE: Since “Display 1” is the
Page 33 and 34: System voltage display BATTERY or B
Page 35 and 36: NOTE: If no operations are carried
Page 37 and 38: UNIT (setting displayed units) You
Page 39 and 40: 3. Fuel management meter unit NOTE:
Page 41 and 42: Fuel flow meter The fuel flow meter
Page 43 and 44: NOTE: Since “Display 1” is the
Page 45 and 46: Remaining fuel display/Changing bac
Page 47 and 48: DISPLAY (setting displays) You can
Page 49 and 50: TTL You can select to show gallons
Page 51 and 52: 7. (1 second): To return to the nor
Page 53 and 54: Description 1 SET button 2 MODE but
Page 55 and 56: Fuel meter The fuel meter shows the
Page 57 and 58: Fuel economy display ECON shows the
Page 59 and 60: Depth display (optional: Triducer-m
Page 61 and 62: Changing settings (custom mode) Swi
Page 63: Changing the display configurations
Page 67 and 68: 7. (1 second): To return to the nor
Page 69: Setting the initial settings Before
show all

command link multifunction meter (square) - Yamaha Outboards

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?