BUFFING COMPOUND

METAL FINISHING DEPARTMENT PRODUCTS GUIDE 14RUST PREVENTING AGENT AND STRIPPING AGENTRUST PREVENTING AGENTApplication Trade Name Composition FeatureWater Soluble Rust Preventing AgentTOP RUST PREVETING AGENT 55120 ~ 30 ml/l*Remove water from copper plating surface quickly and prevent color tarnish.Anti-Color Tarnish Agent for SilverECB 1000100 ml/l*Color tarnish preventing agent for silver to various gases. *Form protective film on silver surface by cathodic electrolysis.Electrolytic Chromating AgentELECTROLYTIC CHROMATING AGENT ECB1 : 100 ml/l, 2 : 10 ml/l*Cathodic electrolytic chromating agent which improves corrosion resistance and color tarnish prevention of chromium plating and various alloy platings.Water SolubleTOP GUARD YDDilution into 3 ~ 4times*Water soluble clear lacquer which is co-polymer of special acrylic monomers and has self-bridging effects. *Give clear film having good adhesion on metals and chemical conversion films.Clear LacquerTOP GUARD SANDilution into 2 ~ 5times*Suitable for clear lacquer as post-treatment of black color chromating. *No film reoeling at drying, and will not hurt to appearance. *Weak acidc water soluble clear lacquer having special acrylic resin as main component.Water Repelling AgentTOP RINSE1 ~ 2 ml/l*Remove water drops on plating surface, make thin film and prevent color tarnish.STRIPPING AGENTApplication Trade Name Composition FeatureFor Cu . Ni Plating / DippingTOP RIP F-60100 g/l, NaCN : 90 ~ 120 g/l*For steel base. *Excellent stripping power and economical as low price.TOP RIP C-15050 ml/l, F-60 : 150 g/lH2SO4 : 100 ml/l*For copper and brass bases. *Easy handling as liquid form and less hazardousness.*To be applied with Top Rip F-60.For Nickel Plating / DippingTOP RIP NSAFE RIP 21 : 200 ml/l, 2 : 200 ml/l300 ml/l, F-60 : 100 g/l*For steel, copper and brass bases. *Easy handling as liquid form and less hazardousness.*For steel, copper and brass bases and to be applied with Top Rip F-60. *Excellent stripping power and easy handling.D SAFE RIP 900A : 40 g/l, B : 200 ml/l*For steel base and strong stripping power and fast in stripping speed and less attacking of base materials.For Acid Type ElectrolessNickel Plating / DippingTOP RIP AZTOP RIP PF-1TOP RIP AX1 : 40 g/l, 2 : 500 ml/lNaOH : 30 g/l180 ml/l, F-85 : 90 g/l500 ml/l, F-85 : 50 g/lNaOH : 50 g/l*Cyanide-free type stripping agent for acid type electroless nickel plating film on copper and copper alloys bases.*Cyanide-free type for steel base*To be applied with Top Rip F-85, and can strip at low temperature.*Cyanide-free type stripping agent for acid type electroless nickel plating film on exclusively steel base.*Excellent stripping power and stripping speed and less attacking of base materials. *To be applied with Top Rip F-85.For CuNiCr Plating / ElectrolysisTOP RIP ERA : 100 ml/l, B : 100 ml/l*Stripping agent for plating film on stainless steel jigs. *Excellent stripping power and less attacking of base materials. *Applicable for long period by replenishment method.For NiCr Plating / ElectrolysisTOP RIP EP1 : 100 ml/l, 2 : 100 ml/l*Stripping agent for copper, nickel and chromium plating films on stainless steel jigs. *Less attacking of base materials.For CuCu Alloy Plating / DippingTOP RIP FC1 : 15 g/l, 2 : 30 g/lNH4OH : 60 ml/l*Cyanide-free type for steel base.*Fast in stripping speed.