BUFFING COMPOUND

Recommendations

Info

METAL FINISHING DEPARTMENT PRODUCTS GUIDE 16TREATMENT CHEMICALS FOR MAGNESIUM AND MAGNESIUM ALLOYSTREATMENT CHEMICALS FOR TOP MAGLOCK PROCESS (PLATING ON MAGNESIUM AND MAGNESIUM ALLOYS)Application Trade Name Composition FeatureEtching AgentActivatorZincate Treatment AgentCleanerActivatorChemical Conversion AgentTOP MAGLOCK E-10TOP MAGLOCK A-20TOP MAGLOCK Z-40TOP MAGSTAR CLEANERTOP MAGSTAR ACIDTOP MAGSTARTOP MAGSTAR ETOP MAGSTAR CR100 ml/lCrO3 : 180 g/l500 ml/lH3PO4 : 100 ml/lConcentration as supplied15 g/l50 ml/lA : 10 g/lB : 300 ml/lA : 10 g/lE : 200 ml/lA : 200 ml/l*Remove oxide film or old chemical conversion film on base surface, and less formation of dimention decreasing.*Remove thin chromating film or oxide film ehich formed at etching step, and make zinc uniform.*Dissolve thin oxide film or hydroxide film on magnesium surface and deposit uniform zinc film. *Weak alkaline substitution so at around pH 11.TREATMENT CHEMICALS FOR TOP MAGSTAR PROCESS (CHEMICAL CONVERSION OF MAGNESIUM ALLOYS)Application Trade Name Composition Feature*Weak alkaline cleaner. *Remove stains on base surface by mild etching effects.*Excellent removeal effects of oxides or impurities on substrate. *Chromic acid free type, and give uniform surface condition.*Form chemical conversion film having excellent corrosion resistance.*Chromic acid free type.*Form chemical conversion film having low resistance value.*Chromic acid free type.*Form chemical conversion film having excellent corrosion resistance and low resistance value. *Chromic acid free type.WASTE WATER TREATMENT CHEMCALS AND WATER QUALITY ANALYZERApplication Trade Name FeatureMetal preciptation RemoverChromic Acid Type Waste SolutionTreatment AgentPolymer Type FlocculantMetal Flocculant and PrecipitantDe-Foaming AgentWaste Solution Treatment Agent for DyeTOP CATCH M-150TOP CATCH CR-200TOP CATCH F-400TOP CATCH F-450TOP CATCH Z-500TOP CATCH D-900*Remove almost all heavy metals as precipitation. *can remove metals having complex with except cyanide.*Can treat chromic acid in waste solution at 1 step from reduction to neutralization. *Easy treatment and no formation of harmful gas at treatment.*Quickly flocculate and settle hydroxide of metal and chelate precipitations. *Dissolve in water quickly.*Disperse almost all heavy metals at presence with iron, and make neutralization, flocculation and sedimentation possuble, and give clean treated water without SS and oil contents.*Excellent de-foaming effects to any kind of foam by small addition amount.*Can treat any kind of concentrated waste solution of dye easily in very short time. *Low costs in waste solution treatment.Simple Water Quality AnalyzerYOSHITEST*Analyze concentrations of materials in waste water quickly and easily in high accuracy, so suitable to speed-up and simplifying of analysis.(Phenol, Chromium, Copper, Iron, Sulfur, Nickel, Znic, Mercury, Lead, Cadmium, Cyanogen, Arsenic, Fluorine, Manganese)
METAL FINISHING DEPARTMENT PRODUCTS GUIDE "CHEMICALS FOR ELECTRONICS AND ENGINEERING PARTS" 01CHEMICALS FOR ELECTROLESS PLATINGApplication Trade Name Bath Composition FeatureTOP NICORON PALPAL - M : 100 ml/lPAL - 1 : 60 ml/l*Excellent brightness, leveling, chemical resistance and anti-color-tarnishing effects.*Good in bath stability.TOP NICORON KITKIT - S : 200 ml/l*Excellent bath stability and brightness maintain effects.*Suitable for application for long period continuously.TOP NICORON ZZ - S : 200 ml/l*Less decrease in deposition speed at continuous usage for long period.*Excellent brightness and bath stability.TOP NICORON BLBL - M : 100 ml/lBL - 1 : 60 ml/l*Excellent brightness and bath stability.*Suitable for application to aluminum.TOP NICORON RDRD - M : 200 ml/lRD - A : 70 ml/l*Phosphorus Content : 12~13%*Can be applied for long period by replenishment method.*Non-magnetic type deposits.*Excellent corrosion resistance and chemical resistance.TOP NICORON Y-45Y - 45 - S : 200 ml/l*Less decrease in deposition speed and brightness at continuous prolonged usage.*Extremely less formation of pitting.Electroless Nickel-PhosphorusAlloy Plating Solution(Continuous Replenishment Type)TOP NICORON SA-98TOP NICORON TOMTOP NICORON NACSA - 98 - M : 100 ml/lSA - 98 - 1 : 60 ml/lTOM - S : 200 ml/lNAC - A : 80 ml/lNAC - B : 200 ml/l*Excellent chemical resistance and corrosion resistance.*Good covering power and less color tarnishing.*Less decrease in deposition speed and brightness at continuous prolonged usage.*Excellent bath stability.*Excellent leveling and chemical resistance.*Non-magnetic type deposits.*Less change in properties at aging.TOP NICORON ONON - S : 200 ml/l*Wide workable range.*Suitable to application for large articles, thick film.TOP NICORON ALTALT - M : 100 ml/lALT - 1 : 60 ml/l*Excellent chemical resistance and corrosion resistance.*Excellent deposition effects to aluminum substrate.TOP NICORON LPHLPH - S : 250 ml/l*Low phosphorus type (1~2%) continuous usage type.*High in hardness of the deposits as plate (Hv 700).TOP NICORON PBWPBW - S : 250 ml/l*Ni-P-B-W alloy plating solution.*Give high hardness, and excellent in abrasion resistance.TOP NICORON LLSLLS - M : 150 ml/lLLS - 1 : 60 ml/l*Exellent bath stability, can be applied for long period (8 turn overs).*Excellent brightness and leveling.TOP NICORON BL 80BL 80 - M : 150 ml/lBL 80 - 1 : 60 ml/l*Can be applied at a low temperature (80). Less decrease in brightness.*Applicable for TOLL SEPTA.TOP NICORON VSVS : 200 ml/l*High utility efficiency of nickel content in the solution.*Applicable for general usage.Electroless Nickel-PhosphorusAlloy Plating Solution(Batch Type)TOP NICORON P-13TOP NICORON YMTOP NICORON CU-50P - 13 : 250 ml/lYM - A : 100 ml/lYM - B : 200 ml/lCU - 50A : 50 ml/lCU - 50B : 950 ml/l*High in phosphourus content at 13 %.*Excellent chemical resistance and magnetic properties.*Suitable for application as non-magnetic film or resistor film.*Phosphorus Content : 2~4%*Excellent electro-conductivity.*Electroless nickel- copper-phosphorus alloy plating solution for metal film resistor.*Copper Content : 50% (T.C.R. : 180~220ppm/)TOP NICORON FY-2900 ml/lFerrous Sulfate : 12.5 g/l*Electroless nickel- iron-phosphorus alloy plating solution for metal film resistor.*Iron Content : 10% (T.C.R. : 50~70ppm/)Electroless Copper Plating SolutionOPC COPPER TT - 1 : 60 ml/lT - 2 : 12 ml/lT - 3 : 100 ml/l*High speed thick film type electroless copper plating solution for dielectric ceramics.*Excellent high frequency wave properties.
Page 1 and 2: METAL FINISHING DEPARTMENT PRODUCTS
Page 15: METAL FINISHING DEPARTMENT PRODUCTS
Page 29: METAL FINISHING DEPARTMENT PRODUCTS

BUFFING COMPOUND

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?