BUFFING COMPOUND

Recommendations

Info

METAL FINISHING DEPARTMENT PRODUCTS GUIDE 02LIQUID BUFFING COMPOUND AND COMPOUND FOR BARREL POLISHINGLIQUID BUFFING COMPOUND (O/W EMULSION TYPE)ApplicationFor Glossy FinishFor Intermediateand Glossy FinishFor Rough FinishLubricating OilFor Mirror FinishGR-330GL-251L-240L-246L-120L-439L-119L-430S-107L-540T-17Trade Name Stainless CopperZincAluminumFeature Viscosity (dPaEs)L-630CUTTING OILCOMPOUND MSteelSteelCopperAlloys*Green rouge type having good cutting power and excellent brightness.*Green lime type having cutting power and brightness correspond to those of GR-330.*Lime type having brightness similar to green rouge. *Safe to regulation of PRTR, owing to chromic oxide free and fine powder alumina type.*Lime type having brightness similar to L-240. *Safe to regulation of PRTR.*Lime type, standard product having good brightness.*Lime type, low viscosity type of L-120. *Easy in handling.*Lime type, high viscosity type.*Lime type, low viscosity type having good cutting power.*Lime type having good cutting power.*Lime type having good cutting power.*Tripoli type having good cutting power.*Excellent cutting power.*prevent clogging and over-heating at butting by polishing belt or buffing cloth.*Give mirror finish without scratch. *In wet type butting, Compound M is supplied continuously by circulation.LIQUID BUFFING COMPOUND (SOLVENT TYPE)ApplicationFor IntermediateFinishTrade NameWHITE PASTE 2PASTE C-14SteelStainlessSteelCopperCopperAlloysZincAluminumFeature*Solid form and applied after abjusting viscosity by kerosene or machine oil. *Lime type having excellent cutting power.*Tripoli type paste formCOMPOUND FOR BARREL POLISHINGApplicationFor IntermediateFinishFor Glossy FinishTrade NameTOP BARCOM K-112TOP BARCOM K-224TOP BARCOM K-141TOP BARCOM K-245SteelStainlessSteelCopperCopperAlloysZincAluminum Feature*Weak alkaline type powder form having good cleaning power.*For exclusively stainless steel, weak alkaline type liquid form. *Applicable in one process from de-scaling to glossy finish.*Applicable in one process from rough finish to glossy finish. *Weak alkaline type powder form.*Neutral type liquid form having excellent brightness.
METAL FINISHING DEPARTMENT PRODUCTS GUIDE 03PRE - TREATMENT AGENTALKALINE SOAK CLEANER (FOR DIPPING)ApplicationTrade Name Composition FeatureFor Ultrasonic Wave CleaningOMPA CLEAN JK30 ~ 50 g/l*Cleaning by fuly non-brushing is possible by applying of uitrasonic wave, and long bath life and economical. *Can be applied at middle ~ high temperature bath. *Cleaning and buffing residue removal in short time is possible.ACE CLEAN30 ~ 50 g/l*Phosphate-free type, reasonable price and popular type.H ACE CLEAN30 ~ 50 g/l*Strong alkaline and phosphate-free type for exclusively steel base. *Excellent cleaning effects.For High BathACE CLEAN 80150 g/l*Excellent cleaning effects to various kinds of oils. *Strong alkaline type, and for exclusively steel base.TemperatureACE CLEAN 530020 ~ 50 g/l*Excellent dissolution and emulsifying effects to various kinds of oils. *Strong alkaline and popular type cleaner.ACE CLEAN 150040 ~ 60 g/l*Cleaner for copper and copper alloys, and applicable to phosphorus copper or steels with strong and stable cleaning power. *Applicable to electrolytic cleaning at anodic and cathodic.KASSEI ORTHO50 g/l*Excellent wetting, permeation and emulsifying effects by dispersion effects of silicata and function of surfactant.NT CLEAN 3040 g/l*Less water quality contamination as use of biodegradable surfactant. *Can be applied for long period by oil separation removal effects.ACE CLEAN C50 g/l*Air agitation is applicable, and phosphate-free and ABS-free type. *Has oil separation effects.For Middle BathACE CLEAN A-11030 ~ 50 g/l*Suitable for cleaning of many kinds of oils, and ABS-free type. *Air agitation can be applied.TemperatureACE CLEAN A-22030 ~ 50 g/l*Air agitation applicable silicate-free and ABS-free type. *Has oil separation effects.ACE CLEAN 66030 ~ 50 g/l*Phosphate-free type and applicable to steels and non-ferrous metals.ACE CLEAN 85020 ~ 70 g/l*Excellent cleaning power to any kind of oils such as mineral, animal and vegetable oils and others. *Excellent removing effects of oils, inactive film, carbon and others sticked to mainly copper or copper alloys surface.For Low BathACE CLEAN 3030 ~ 100 g/l*Can be applied at low bath temperature with air agitation. *Phosphate-free and ABS-free type.TemperatureACE CLEAN 7040 ~ 60 g/l*Strong cleaning power at even low bath temperature, and can be applied to uiltrasonic wave cleaniing at 10 ~ 20 g/l.Additive for Alkaline CleanerACE CLEAN AD2 ~ 15 ml/l*Improve cleaning power and bath life extremely by adding to alkaline cleaning bath.For SprayingACE CLEAN S 10 ~ 30 g/l*Cleaner for spray application having excellent cleaning power at even low bath temperature of 20 ~ 40CACID CLEANER (FOR DIPPING)Application Trade Name Composition FeatureAcid cleanerTOP DESCALE SK50 ml/l, HCI: 50 ~ 300 ml/l*Remove oils and rust on steel surface at one treatment.Corrosion InhibitorTOP DESCALE B1 ml/l*Suppress base etching of steel without delaying of de-scaling time. *Applicable to both sulfuric acid bath and hydrochloric acid bath.BUFFING RESIDE REMOVERApplicationTrade Name Composition FeatureWeak Alkaline Buffing Residue RemoverKOMA CLEAN BN30 ~ 50 ml/l*Remove buffing residue on steel, coppeer and copper alloys surface. *Weak alkaline type, and applicable as pre-cleaning.
Page 1: METAL FINISHING DEPARTMENT PRODUCTS
Page 5 and 6: METAL FINISHING DEPARTMENT PRODUCTS
Page 29: METAL FINISHING DEPARTMENT PRODUCTS

BUFFING COMPOUND

Create successful ePaper yourself

Delete template?

Save as template?