BUFFING COMPOUND

METAL FINISHING DEPARTMENT PRODUCTS GUIDE 09ZINC PLATING BRIGHTENER AND MIST PREVENTING AGENTBRIGHTENER FOR ALKALINE CYANIDE-FREE BATHApplication Trade Name Composition FeatureNC ZINC 6060B : 2.5 ml/l, 60R : 0.3 ml/lPUR : 2 ml/l*Deposition film has good physical properties, no formation of blister at heat-treatment, and excellent adhesion, brightness and leveling.For Barrel PlatingNC ZINC K-6600MU : 4 ml/l, R : 1 ml/l*Good in brightness at low current density area, and good in chromating effects after baking.NC ZINC K-180K-180 MU : 6 ml/l, CM : 4 ml/lHL : 0.1 ml/l*Nice in plating appearance and good in chromating finish. *As chelating agent free, removal of heavy metals at waste water treatment is easy.*Applicable at high current, and excellent post-processing effects.NC ZINC S-30A : 2 ml/l, B : 8 ml/l*Good productivity, as applicable at full strangth cyanide bath and high current.NC ZINC S-40A : 0.5 ml/l, B : 5 ml/l*At even full strength cyanide bath, can gain excellent brightness and covering power and good physical properties at low current density area.For Rack PlatingNC ZINC S-100S-100 MU : 6 ml/l, CM : 4 ml/lHL : 0.5 ml/l*Nice in plating appearance and good in chromating finish. *As chelating agent free, removal of heavy metals at waste water treatment is easy.*Applicable at high current, and excellent post-processing effects.NC ZINC 90A : 1 ml/l, B : 3 ml/l*Wide brightness range and excellent brightness and leveling. *Easy bath maintenance and excellent film physical properties. *Can be applied to both rack plating and barrel plating.BRIGHTENER FOR CYANIDE BATHApplication Trade Name Composition FeatureFor Barrel PlatingZINC LIGHT K-2500ZINC LIGHT K-75002 ml/l2 ml/l*Excellent brightness at low current density area and good dissolution. *For low and half strength cyanide baths.*Excellent brightness and leveling, wide workable bath temperature range, and excellent brightening effects at current density area. *Applicable from low to full strength cyanide baths.For Rack PlatingDUO ZINC 100ZINC LIGHT S-34002 ~ 5 ml/l3 ml/l*Wide brightness range and workable range, and excellent brightness and covering power. *For half and full strength cyanide bath, and applicable to barrel bath.*Excellent brightness, fast brighening effects and wide brigheness range. *Applicable to low, half and full strength cyanide baths.MIST PREVENTING AGENT FOR ALKALINE ZINC PLATINGApplication Trade Name Composition FeatureNC ZINC MIST0.2 ~ 1 ml/lMist Preventing AgentZINC MIST0.5 ~ 2 ml/lBRIGHTENER FOR ACID TYPE CYANIDE-FREE BATH*For alkaline cyanide-free bath. *Prevent mist scattering completely by small addition.*For cyanide bath, and prevent mist scattering completely by small addition.Application Trade Name Composition FeatureZINC NH1 : 30 ml/l, 2 : 1.5 ml/l*For barrel bath and solvent-free ammonium chloride bath. *Excellent brightness and leveling, and soft in plating film.Acid BathZINC A-100, A-200ZINC ACKA-100 : 30 ml/l, A-200 : 1 ml/l1 : 30 ml/l, 2 : 2 ml/l*For both rack and barrel plating baths, and for common use bath of ammonium chloride and potassium chloride. *Low running costs and economical.*For barrel plating bath and for ammonia-free potassium bath. *Excellent brightness and leveling.ZINC A1 : 30 ml/l, 2 : 1 ml/l*For both rack and barrel plating baths, and for common use bath of ammonium chloride and potassium chloride. *Induce properties of each bath maximally.