Conveyor Chain - Tsubaki

Double Plus Free FlowChainAluminum FrameSectionB(1) Aluminum Frame is for Chain with Engineering PlasticRollers.(2) Aluminum Frame with Steel RailThe small roller on the aluminum frame conveying sideruns on the steel rail (refer to the dimension diagram).∞ Double-Plus Chain with Engineering Plastic Roller∞ Double-Plus Chain with Steel Roller∞ Center Roller Chain(3) Specialized Aluminum Drive section and Driven SectionFramesTo receive the chain return part, the frame has been cut.Standard length: 3.28 ft. (All sizes)Pallet Guide Rail(1) The rail attached to the side of the Aluminum frame thatguides the pallet(2) Rails for use with the Drive section, Middle section andDriven section are available.Plastic Rail(1) So the pallet slides smoothly, attach the plastic rail to thepallet guide rail.(2) Rails for use with the Drive section, Middle section andDriven section are available.Return Guide(1) Attached to either end of the frame it guides the returningDouble-Plus Chain.Bracket(1) Used to attach the return guide.Frame Joint(1) Nut-like joint part that connects frame sections.Aluminum FrameAluminum Frame for use withDrive section and Driven SectionAluminum Framewith Steel RailPlastic RailPallet Guide RailBracketReturn GuideConveyor Chain B114Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.ca