12.07.2015 Views

Conveyor Chain - Tsubaki

Conveyor Chain - Tsubaki

Conveyor Chain - Tsubaki

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Double Plus Free Flow<strong>Chain</strong><strong>Conveyor</strong> Design1. <strong>Conveyor</strong> ends and correct sprocket positionSpecial Aluminum Frame for Drive and Driven section.SprocketAll dimensions in inches unless otherwise stated.<strong>Chain</strong> No. C2030VRP C2040VRPRail No.C2030VRP-R3LC2030VRP-R3LSC2040VRP-R4LC2040VRP-R4LSC2050VRPC2050VRP-R4LC2050VRP-R4LSBracketReturn guideZZL0.871.630.62.04All dimensions in inches unless otherwise stated.<strong>Chain</strong> No. C2050VRP C2060VRPRail No.C2050VRP-R3HC2050VRP-R3HSC2060VRP-R4KC2060VRP-R4LC2060VRP-R4LS0.662.45C2080VRPC2080VRP-R3LSSectionBLZ3.110.610.98L2.452.864.082. Aluminum frame operation dimensionsThe rail shown below has no Aluminum frame for the Drive orDriven parts. Use the following dimensions as a reference andadditionally process a Middle Section frame.All dimensions in inches unless otherwise stated.<strong>Chain</strong> No.C2050VRPRail No.X (Drive side)X (Driven)YC2050VRP-R3HC2050VRP-R3HS13.884.901.22C2060VRPC2060VRP-R4K17.555.311.633. Fastening bolt and conveyor heightFrame JointAluminum frameAll dimensions in inches unless otherwise stated.Item1 2 3 4 5 6FrameC2030VRP-R3LC2030VRP-R3LSC2040VRP-R4LC2040VRP-R4LSM6 x 10lM6 x 12lM6M6M5M6M6M8M5M6M6 x 8lM6 x 8lH2.512.78L0.5911.63C2050VRP-R4LC2050VRP-R4LSM8 x 20lM8M8M10M8M8 x 10l3.371.47Pallet Guide RailC2050VRP-R3HC2050VRP-R3HSC2060HVRP-R4KC2060HVRP-R4LM8 x 20lM8 x 20lM8M8M8M8M10M10M8M8M8 x 10lM8 x 10l5.823.761.511.82C2060HVRP-R4LSC2080HVRP-R3LSM8 x 25lM8M8M10M8M8 x 12l5.311.92(1) Positioning between Aluminum framesReferring to the above diagram, using the V-notch, A , as a guide, position the frame. Using bolts fix the frame at 4 .(2) Aluminum frame connectionAfter positioning, connect the frames using the frame joint; this is firmly reinforced.* The frame joint is not to be used for positioning between the frames.(3) Attachment of Pallet Guide RailReferring to the above diagram, at the V-notch, B , make the required size hole and using a hexagonal bolt attach thePallet Guide Rail.<strong>Tsubaki</strong> of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.ca<strong>Conveyor</strong> <strong>Chain</strong> B121

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!