Conveyor Chain - Tsubaki

Top RollerFree Flow ChainSectionBOutboard Roller Chain with Top Rollers (Top Roller Chain) is often used on accumulating free flow conveyors.Top Roller Chain is based on the standard chain with extended side plates (SK-1 attachments). Top rollers are installed on the pinsthat connect SK-1 extended plates. Top Roller chains are available with steel or engineered plastic top rollers on every link or every2nd link. Pallets with conveyed objects are loaded on the top rollers.There are three types of base chain:(1) Double pitch roller chain with standard rollers (straight side plates, small rollers).(2) Double pitch roller chain with oversize rollers (straight side plates, oversized rollers).(3) RS-type (figure-eight side plates, small rollers; oversized rollers are not available).You can select various combinations of base chain materials and top rollers. Base chains can be carbon steel, carbon steel (withplastic bottom rollers) or lube-free Lambda. Plastic or steel top rollers may be attached.The features of Top Roller Chain include the following:1) High maximum allowable load.2) Economical cost.3) Top Roller Chain installation kits, including the guide rails and other components, are not available.Standard sprockets can be used with RS (single pitch) chain and with Double Pitch chain with Standard size rollers. Other types ofTop Roller Chain (eg. Double Pitch chain with Oversize rollers) require special sprockets.Two other types of Top Roller Chains (also included in this catalogue) provide greater stability than standard Top Roller Chains:- Double Strand (RS or Double Pitch) Top Roller Chain.- TG-form with SK attachments that point downward.Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.caConveyor Chain B95