Conveyor Chain - Tsubaki

X-Lambda (Lube-Free)Conveyor ChainX-Lambda Lube-Free Conveyor ChainLonger (5x) Life than “Original” Lambda Conveyor ChainSectionBX-Lambda features an oil impregnated felt seal that provides more than 5 times the wear life of “Original” Lambda conveyor chain.(In-house comparison at –10°C ˜ +60°C (+14°F ˜ +140°F))Basic ConstructionFelt SealFelt SealSpecial OilImpregnatedBushingRollerInner/Outer Plates: BlackenedAmbient temperature range (–10°C ˜ +60°C/+14°F ˜ +140°F)• In-house testing comparison.Operating TemperatureOuter Plate–10°C ˜ +150°C (+14°F ˜ +302°F)SprocketStandard RS Roller Chain sprockets can be used.(Only for Single Strand Chain)Connecting MethodWhen connecting the chain, use an X-Lambda Chainconnecting link (with a felt seal). As shown in Diag. 1, insertfelt seals between the outer plate and the connecting linkplate then attach the link.Felt SealFelt SealConnecting Link PlateClip(For #80 size and above the pin is a cotter pin type)Diag. 1 Attaching the connecting linkImportant Notes:• Inner plate is thicker than Standard RS Roller Chain. Also, due to the insertion of the felt seal, the pin (dimensions L 1 and L 2 inchain diagrams) is now longer.• Offset links are not available - use an even number of links.• As the felt seal is oil impregnated, the surface of X-Lambda Chain has more oil on it than “Original” Lambda Chain.Conveyor Chain B34Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.ca