Conveyor Chain - Tsubaki

Plastic RollerAttachment ChainPlastic Roller Double Pitch chains are available in both carbon steel and "SS" 304 grade stainless steel. The roller is made from apoly-acetal resin which provides smooth quiet operation, resists corrosion, and is ideal for a wide variety of conveyor applications.Attachments are available. Do not exceed the “maximum roller loads” given in the tables below when the chain is directly carryingweight. Rated working loads (allowable chain loads) are reduced due to the pressure between the sprocket and the plastic roller.SectionBOversize Roller TypeL2 L1TφDφRW THPPAll dimensions in inches unless otherwise stated.RollerDia.RWidthBetweenInner LinkPlatesWLink Plate PinLengthL 1 + L 2LengthL 1LengthL 2AverageTensileStrength(lbs.)MaximumAllowableLoad(lbs.)MaximumAllowableRoller Load(lbs./roller)Approx.Weight(lbs./ft.)ChainNumberPitchPThicknessTHeightHDia.DCarbon SteelC2042D 1.000 0.625 0.313 0.060 0.472 0.156 0.717 0.325 0.392 3,750 100 44 0.33C2052D 1.250 0.750 0.375 0.080 0.591 0.200 0.878 0.406 0.472 6,170 154 66 0.57C2062HD 1.500 0.875 0.500 0.126 0.677 0.235 1.224 0.573 0.652 9,040 231 110 0.98C2082HD 2.000 1.125 0.625 0.157 0.906 0.313 1.543 0.720 0.823 15,400 397 200 1.77C2102HD 2.500 1.563 0.750 0.189 1.125 0.376 1.823 0.858 0.965 24,300 573 286 2.44Stainless SteelC2042SSD 1.000 0.625 0.313 0.060 0.472 0.156 0.717 0.325 0.392 - 100 44 0.33C2052SSD 1.250 0.750 0.375 0.080 0.591 0.200 0.878 0.406 0.472 - 154 66 0.57C2062HSSD 1.500 0.875 0.500 0.126 0.677 0.235 1.224 0.573 0.652 - 231 110 0.98C2082HSSD 2.000 1.125 0.625 0.157 0.906 0.313 1.543 0.720 0.823 - 397 200 1.77C2102HSSD 2.500 1.563 0.750 0.189 1.125 0.376 1.823 0.858 0.965 - 573 286 2.44Conveyor Chain B58Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.ca