Conveyor Chain - Tsubaki

Press NutAttachment ChainDouble PitchPress Nut Attachment ChainA-1 Attachment A-2 AttachmentXCL2L1TφDNφOφRW TX2XCL2L1TφDNKφOφRW TX2SectionBSTHBT1STHBT1PPPPK-1 AttachmentK-2 AttachmentCL1TNKφOCL1TNKφOX XCL2φDφRW TX2X2X XCL2φDφRW TX2X2STHBT1STHBT1PPPP• Connecting links: RF2040 to RF2060 use spring clips. Base chain pins are riveted.• Attachments shown are Standard roller type. However, the dimensions for attachments are the same when Oversize rollers areused. Also, the drawings show attachments added on every link• Pins other than those on connecting links are riveted regardless of whether attachments are present.• X and X2 are the width of the attachments installed on the outer (pin) link and inner (roller) link, respectively.All dimensions in inches unless otherwise stated.RollerDia.RWidthBetweenInner LinkPlatesWLink Plate PinChainNumberPitchPThicknessTHeightHDia.DLengthL 1 + L 2LengthL 1Standard Roller TypeC2040NM 1.000 0.312 0.313 0.060 0.472 0.156 0.717 0.325 0.392C2050NM 1.250 0.400 0.375 0.080 0.591 0.200 0.878 0.406 0.472C2060HNM 1.500 0.469 0.500 0.125 0.677 0.235 1.224 0.573 0.652Oversize Roller TypeC2042NM 1.000 0.625 0.313 0.060 0.472 0.156 0.717 0.325 0.392C2052NM 1.250 0.750 0.375 0.080 0.591 0.200 0.878 0.406 0.472C2062HNM 1.500 0.875 0.500 0.125 0.677 0.235 1.224 0.573 0.652LengthL 2All dimensions in inches unless otherwise stated. “O” Dimension (Nut Size) is in metric.Attachment DimensionsChainNumberChainNumber C K N O B S X X 2 T 1C2040NM C2042NM 0.500 0.374 0.751 M3 0.217 0.358 0.759 0.692 0.142C2050NM C2052NM 0.625 0.468 0.937 M4 0.276 0.437 0.952 0.866 0.169C2060HNM C2062HNM 0.844 0.562 1.125 M5 0.315 0.578 1.240 1.110 0.248Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.caConveyor Chain B65