Conveyor Chain - Tsubaki

Anti-CorrosiveConveyor ChainAn Introduction to TsubakiAnti-Corrosive Conveyor ChainNP Nickel Plated Conveyor ChainNP is an RS Roller chain that has been plated with nickel. NP Chain has an attractive appearance and light corrosion resistance thatmakes it suitable for outdoor conditions where it is exposed to water. The maximum allowable load of nickel plated chain is 15% lessthan the equivalent RS roller chain. Nickel plated conveyor chain should not be used where the chain comes into direct contact withfood products. Nor should it be used where the nickel plated coating flakes may mix with and or contaminate food products. In nonfoodapplications, a cover should be used where the coating flakes or wear dust may pose a problem. Nickel plated conveyor chain hasmagnetic properties. Working temperature range: +14˚F ˜ +140˚FSectionBSS Stainless Steel Conveyor ChainStainless steel conveyor chain is composed of type 304 stainless steel (clips are type 301). This chain is more corrosion resistant thanRS Roller Chain, NP Roller Chain and Ultra WP Roller Chain. It can be used in special environments such as corrosive conditionsunderwater and in acids/alkalis. It is non-magnetic, though it may have some magnetic properties at low operating temperatures.Working temperature range: -4˚F ˜ +752˚FAS Stainless Steel Conveyor ChainThis conveyor chain uses heat-treated hardened stainless steel (type 600) for the pins and rollers. The link plates and bushings aremade from type 304 stainless steel (clips are type 301). AS series chains are an excellent choice for drives requiring both corrosionresistance and high load capacity. Maximum allowable load is 50% greater than “SS” series Stainless Steel conveyor chain. Note thattype 600 stainless steel has magnetic properties. Working temperature range: -4˚F ˜ +752˚FNeptune Conveyor ChainNeptune is RS Roller Chain that has been both zinc galvanized and specially treated on the surface with a coating that together providea double plated effect. (The surface treatment is applied to each individual part of the chain before it is assembled). This highlydurable chain has superior corrosion resistance to salt-water and all types of weather. Tensile strength and maximum allowable loadare identical to carbon steel RS Roller Chain. Neptune conveyor chain should not be used where the chain comes into direct contactwith food products. In non-food applications, a cover should be used where the coating flakes or where dust may pose a problem.Working temperature range: +14˚F ˜ +140˚FTsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.caConveyor Chain B37