Conveyor Chain - Tsubaki

Ground AttachmentChainRS Single PitchGround Attachment ChainThe upper surface of the link plate has been ground to provide a smooth conveying surface and to protect the conveyed material fromdamage. For attachment chain, the upper surface of the attachment and the outer surface of the roller are ground.A-1 Attachment K-1 AttachmentSectionBGrindingGrinding• X and X2 are the width of the attachments installed on the outer (pin) link and inner (roller) link, respectively• Drawings show attachments added on every link• Pins other than those on connecting links are riveted regardless of whether attachments are presentAll dimensions in inches unless otherwise stated.RollerDia.RWidthBetweenInner LinkPlatesWLink Plate PinChain PitchThickness Height Height Dia. Length Length LengthNumber PT H h D L 1 + L 2 L 1 L 2RS40PG 0.500 0.312 0.313 0.059 0.472 0.409 0.156 0.716 0.324 0.392RS50PG 0.625 0.400 0.375 0.079 0.591 0.512 0.200 0.874 0.405 0.469RS60PG 0.750 0.469 0.500 0.094 0.713 0.614 0.235 1.086 0.505 0.581RS80PG 1.000 0.625 0.625 0.126 0.949 0.819 0.313 1.397 0.639 0.758RS100PG 1.250 0.750 0.750 0.157 1.185 1.024 0.376 1.677 0.777 0.900RS120PG 1.500 0.875 1.000 0.189 1.425 1.228 0.437 2.118 0.980 1.138RS140PG 1.750 0.991 1.000 0.220 1.661 1.433 0.500 2.307 1.059 1.248RS160PG 2.000 1.116 1.250 0.251 1.897 1.637 0.562 2.703 1.253 1.450All dimensions in inches unless otherwise stated.Attachment DimensionsChainNumber C N O S XRS40PG 0.500 0.374 0.141 0.307 0.700RS50PG 0.625 0.500 0.204 0.397 0.921RS60PG 0.750 0.625 0.204 0.456 1.110RS80PG 1.000 0.751 0.267 0.614 1.440RS100PG 1.250 1.000 0.342 0.763 1.767RS120PG 1.500 1.125 0.405 0.889 2.210RS140PG 1.751 1.374 0.468 1.110 2.540RS160PG 2.000 1.500 0.562 1.236 2.900Note: Spring clips provided on sizes 40-60. Cotter pins provided on sizes 80-160.Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.caConveyor Chain B69