Conveyor Chain - Tsubaki

Warning! WARNINGSectionBUSE CARE TO PREVENT INJURYCOMPLY WITH THE FOLLOWINGTO AVOID SERIOUS PERSONAL INJURY1. Guards must be provided on all chain and sprocket installations inaccordance with provisions of ANSI/ASME B15.1 – 1996 “SafetyStandards for Mechanical Power Transmission Apparatus,” andANSI/ASME B20.1 – 1996 “Safety Standards for Conveyors andRelated Equipment,” or other applicable safety standards. Whenrevisions of these standards are published, the updated edition shallapply.2. Always lock out power switch before installing, removing, lubricatingor servicing a chain system.3. When connecting or disconnecting chain:a. Eye protection is required. Wear safety glasses, protectiveclothing, gloves and safety shoes.b. Support the chain to prevent uncontrolled movement of chain andparts.c. Use of pressing equipment is recommended. Tools must be ingood condition and properly used.d. Determine correct direction for pin/rivet removal or insertion.Revision 5/94Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905-676-0400 Fax: 905-676-0904 Toll-Free: 800-263-7088 www.tsubaki.ca e-mail: info@tsubaki.caConveyor Chain B175