Symbol LS3408 Product Reference Guide - Miles Data Technologies

Wand Emulation Interface 9 - 7Convert All Bar Codes to Code 39By default, the Wand Emulation Interface sends data to the host in the symbology decoded. This can present aproblem for customers with older systems that do not recognize some newer symbologies (for example, GS1DataBar).Enable this parameter to ignore the decoded symbology, and transmit the data as a Code 39 bar code. Lowercasecharacters in the original data stream transmit as uppercase characters. This also allows ADF formatting to occur.If you enabled Ignore Unknown Characters, a space replaces characters that do not have a correspondingcharacter in the Code 39 symbology set.If you disabled Ignore Unknown Characters, if the scanner encounters any characters that do not have acorresponding character, it emits an error beep and transmits no data.ADF Note: By default, the Wand Emulation interface does not allow ADF rules to process scanned data. Enablingthis parameter allows ADF rules to process scanned data. See Chapter 14, Advanced Data Formatting..Convert to Code 39 for Wand Host(Enable)*Do Not Convert to Code 39 for Wand Host(Disable)