Symbol LS3408 Product Reference Guide - Miles Data Technologies

RS-232 Interface 6 - 3RS-232 Default ParametersTable 6-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s)provided in the Parameter Descriptions section beginning on page 6-4.NOTESee Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, andmiscellaneous default parameters.Table 6-1 RS-232 Host Default TableParameterRS-232 Host ParametersDefaultPageNumberRS-232 Host Types Standard RS-232 6-6Baud Rate 9600 6-7Parity None 6-8Check Receive Errors Enable 6-9Stop Bit Select 1 Stop Bit 6-10Data Bits 8-Bit 6-10Hardware Handshaking None 6-11Software Handshaking None 6-13Host Serial Response Time-out Minimum: 2 sec 6-15RTS Line State Host: Low RTS 6-16Beep on Disable 6-16Intercharacter Delay Minimum: 0 msec 6-17Nixdorf Beep/LED Options Normal Operation 6-18Ignore Unknown Characters Send Bar Code 6-18