Symbol LS3408 Product Reference Guide - Miles Data Technologies

Advanced Data Formatting 14 - 27Setup Field(s)Table 14-1 Setup Field(s) DefinitionsMove CursorParameter Description PageMove Cursor To a CharacterScan the Move Cursor To Character, then any printable ASCIIcharacter from the Alphanumeric Keyboard on page 14-95. Thismoves the cursor to the position after the matching character. If thecharacter is not there, the rule fails and ADF tries the next rule.14-28Move Cursor to Start of Data Scan this bar code to move cursor to the beginning of the data. 14-28Move Cursor Past aCharacterMove Cursor Past a SpecificStringMove Cursor to Specific Stringand ReplaceMove Cursor to LastOccurrence of String andReplace AllThis action moves the cursor past all sequential occurrences of aselected character. For example, if the selected character is ‘A’, thecursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan the Move Cursor PastCharacter, then select a character from the Alphanumeric Keyboard. Ifthe character is not there, the cursor does not move (i.e., has no effect).This action moves the cursor past the first occurrence of a selectedstring. Scan Move Cursor Past Specific String, then select thecharacter(s) (up to 10) using the Alphanumeric Keyboard. Scan theEnd of Message bar code on page 14-106.This action moves the cursor to the first occurrence of a selected stringand replaces the string with another user-defined string. Scan MoveCursor to Specific String and Replace, then enter an alphanumericstring representing the character(s) (up to 10) to match and delete usingthe Alphanumeric Keyboard. Scan the End of Message bar code onpage 14-106. Enter another alphanumeric string representing thecharacter(s) (up to 10) to insert using the Alphanumeric Keyboard.Scan End of Message.This action replaces all occurrences of a selected string with anotheruser-defined string, and moves the cursor to the beginning of the lastoccurrence. Scan Move Cursor to Last Occurrence of String andReplace All, then enter an alphanumeric string representing thecharacter(s) (up to 10) to match and delete using the AlphanumericKeyboard. Scan the End of Message. Enter another alphanumericstring representing the character(s) (up to 10) to insert using theAlphanumeric Keyboard. Scan End of Message.14-2814-2814-2814-29Skip to End Scan Skip to End to move the cursor to the end of the data. 14-29Skip Ahead “N” CharactersSkip Back “N” CharactersSend Preset ValueScan one of these bar codes to select the desired number of positionsto move the cursor ahead.Scan one of these bar codes to select the desired number of positionsto move the cursor back.Send prefix and/or suffix value by scanning the appropriate bar code.Set these values using the Scan Prefix and Scan Suffix bar codes onpage 13-4.14-3014-3214-33