Symbol LS3408 Product Reference Guide - Miles Data Technologies

Symbologies 12 - 11User-Programmable SupplementalsIf you selected a Supplemental User-Programmable option from Decode UPC/EAN/JAN Supplementals on page12-8, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using thenumeric bar codes beginning on page D-1. Select User-Programmable Supplemental 2 to set a second 3-digitprefix. Then select the 3 digits using the numeric bar codes beginning on page D-1.User-Programmable Supplemental 1User-Programmable Supplemental 2UPC/EAN/JAN Supplemental RedundancyWith Autodiscriminate UPC/EAN/JAN Supplementals selected, this option adjusts the number of times asymbol without supplementals is decoded before transmission. The range is from two to thirty times. 14 or above isrecommended when decoding a mix of UPC/EAN symbols with and without supplementals. The default is 14.Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes from Appendix D,Numeric Bar Codes. Enter a leading zero for single digit numbers. In case of an error, or to change the selection,scan Cancel on page D-3.UPC/EAN/JAN Supplemental Redundancy