Symbol LS3408 Product Reference Guide - Miles Data Technologies

Miscellaneous Scanner Options 13 - 7FN1 Substitution ValuesThe Wedge and USB HID Keyboard hosts support a FN1 Substitution feature. Enable this to replace a FN1character (0x1b) in an EAN128 bar code with a user-selected value. This value defaults to 7013 (Enter Key).1. To select a FN1 Substitution Value, scan the bar code below.Set FN1 Substitution Value2. Locate the keystroke desired for FN1 Substitution in the ASCII Character Set table for the current hostinterface. Enter the 4-digit ASCII Value by scanning each digit in Numeric Bar Codes on page D-1.3. To correct an error or change the selection, scan Cancel on page D-3.To enable FN1 Substitution for Wedge, scan the Enable Keyboard Wedge FN1 Substitution bar code on page5-10.To enable FN1 Substitution for USB HID Keyboard, scan the Enable USB Keyboard FN1 Substitution bar code onpage 7-9.Transmit “No Read” MessageScan a bar code below to select whether or not to transmit a No Read message. Enable this to transmit thecharacters NR when a bar code does not decode. Disable this to send nothing to the host if a symbol does notdecode.NOTEIf you enable Transmit No Read, and also enable Symbol Code ID Character or AIM Code ID Characterfor Transmit Code ID Character on page 13-3, the scanner appends the code ID for Code 39 to the NRmessage.Enable No Read*Disable No Read