Symbol LS3408 Product Reference Guide - Miles Data Technologies

4 - 2 Symbol LS3408 Product Reference GuideErrors While ScanningUnless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.User Preferences Default ParametersTable 4-1 lists the defaults for user preferences parameters. To change any option, scan the appropriate barcode(s) provided in the User Preferences section beginning on page 4-3.NOTESee Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, andmiscellaneous default parameters.Table 4-1User Preferences Default TableParameterDefaultPageNumberUser PreferencesSet Default Parameter Restore Defaults 4-3Parameter Scanning Enable 4-4Beeper Tone High 4-4Beeper Volume High 4-5Power Mode Continuous On 4-5Laser On Time 3.0 sec 4-6Beep After Good Decode Enable 4-6Trigger Mode Level 4-7Aim Duration 0.0 sec 4-8