Symbol LS3408 Product Reference Guide - Miles Data Technologies

Symbologies 12 - 37Codabar (NW - 7)Enable/Disable CodabarTo enable or disable Codabar, scan the appropriate bar code below.Enable CodabarSet Lengths for Codabar*Disable CodabarThe length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)the code contains. Set lengths for Codabar to any length, one or two discrete lengths, or lengths within a specificrange.One Discrete Length - Select this option to decode only Codabar symbols containing a selected length. Select thelength using the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only Codabarsymbols with 14 characters, scan Codabar - One Discrete Length, then scan 1 followed by 4. In case of an error,or to change the selection, scan Cancel on page D-3.Codabar - One Discrete LengthTwo Discrete Lengths - Select this option to decode only Codabar symbols containing either of two selectedlengths. Select lengths using the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decodeonly those Codabar symbols containing either 2 or 14 characters, select Codabar - Two Discrete Lengths, thenscan 0, 2, 1, and then 4. In case of an error, or to change the selection, scan Cancel on page D-3.Codabar - Two Discrete Lengths