Symbol LS3408 Product Reference Guide - Miles Data Technologies

10 - 4 Symbol LS3408 Product Reference GuideScanner Emulation HostScan the bar code below to enable the Scanner Emulation host.Scanner Emulation HostScanner Emulation Host ParametersBeep StyleThe Scanner Emulation host supports three beep styles.• The default is to beep when the connected decoder issues the decode signal to the scanner. This way, thescanner and the attached decoder beep at the same time.• The second option is to beep on the scanner's decode. This results in a double beep sequence from mostdecoders, since the scanner beeps, and the decoder beeps (at a different frequency) when it successfullydecodes the output.• The third option is to not beep at all since the attached decoder issues the decode beep.In all cases, if an error condition occurs, the scanner issues error beeps.*Beep On Successful TransmitBeep At Decode TimeDo Not Beep