2006 Ford Racing Performance Parts Catalog

FASTENERS, PLUGS, DOWELS
INTAKE MANIFOLD BOLT
KIT (EFI GT-40)
M-6002-A50 5.0L/302 1994-95
with EFI GT-40 manifold.
Kit includes bolts required to install
GT-40 EFI upper manifold
on 1994-95
Mustang.
C460 “SPORTSMAN” HEAD
STUD KIT
M-6014-G500*
• Fits M-6049-C460 heads
on M-6010-A460 block
• Sold in engine sets, includes studs,
nuts and washer
• Manufactured by ARP exclusively
for Ford Racing
CAMSHAFT PLUG
M-6026-S351* 302/351
Ford Racing blocks
camshaft plugs to service
M-6010-R302/S302/R351/
R352/R353/R354/R355/
S351/V351/W351 blocks. Package of 10.
REPLACEMENT PARTS FOR
M-6010-C302/J351/K351
ALUMINUM BLOCKS
M-6012-A351*
Service replacement cylinder bore sleeve for
Ford Racing 302 and 351 aluminum cylinder
blocks. Sleeve ID is 3.98". Length is 5.820".
The length can be trimmed to fit.
M-6012-B351*
Same as M-6012-A351
except OD is .010" oversize.
HEAD BOLT KIT
M-6065-D289* 351W type heads
on 289/302 block
Use when installing stock 351W, Ford Racing
cast iron (M-6049-L302/L303) or Ford Racing
aluminum head (M-6049-Y302/Y303/X302/
X303/X304/X305) on 289/302 blocks.
Kit features 20 ARP ® cylinder head bolts with
.4375" diameter thread. Includes 20 special
stepped washers. Services two heads.
HEAD BOLT KITS (351)
M-6065-B58**
Head bolt kit contains 20 head bolts for
assembling 351W engines with stock or
GT-40 heads. Washer faced bolts .5" thread.
M-6065-C351*
M-6049-N351/N352 cast iron “Sportsman”
heads on 351/351W/302 Ford Racing blocks
Contains 20 .5" bolts.
REPLACEMENT PLUG KIT
M-6026-R452*
Fits M-6010-R451 block
“STAGE 8” LOCKING HEADER BOLT SYSTEMS
These kits fit most V-8 and many other engines. Includes (16) bolts and locking hardware.
PART NUMBER SIZE FITS
M-9432-A50 .375-16 x .75" ➀ Most Headers
M-9432-A51 .375-16 x 1" ➀ Ford Racing Hi-Flow Shorty Headers
M-9432-A54 8mm-1.25 x 22mm 4.6L/5.4L Modular V-8 Engines
• 100% reliable, zero failures in more than 6,000,000 applications. Header fasteners absolutely,
positively will not back out. Eliminates need to monitor and tighten bolts regularly
• Grade 8 aircraft quality bolts made in U.S.A. Duplex nickel plated
• Manufacturer’s Lifetime Warranty
• NOTE: ➀ Will not fit 4.6L/5.4L modular V-8
*Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part.
PLUG AND DOWEL KITS
M-6026-A302** 289/302/351W
Necessary dowels, cup plugs and pipe plugs for
rebuilding Ford Racing M-6010-A4 and
production V-8 blocks.
M-6026-R351* 351 Ford Racing
Necessary dowels, cup plugs and pipe plugs for
rebuilding Ford blocks: M-6010-R302/R351/
R352/R353/R354/R355/S302/S351/V351/W351.
M-6026-A460*
Use with M-6010-A460 cylinder block.
Kit includes cam plug, oil gallery plugs,
transmission dowels and head dowels.
M-6026-A58*
• Replacement plugs and dowel kit for
M-6010-A58/B58 blocks
• Includes all special cup plugs and dowels
M-6026-A302 shown
M-6026-B302* 289/302/351W/351C
Threaded freeze plug (1.25" NPT) kit for all small
V-8 engine blocks. Does not include dowels.
O-RING AND DOWEL KIT
M-6026-R451*
Use with M-6010-R451/S451 blocks
CYLINDER HEAD STUD KIT
M-6014-Z304
• Use when installing M-6049-Z304/Z304A
heads on a “Sportsman II” 351W block
• .500" diameter studs with 12 point nuts
and hardened washers
www.fordracingparts.com 105
ENGINE
COMPONENTS