2006 Ford Racing Performance Parts Catalog

CHASSIS COMPONENTS
FRONT LOWER
CONTROL ARM KIT
M-3075-A
This kit enables owners of 1979-93 Mustang/Capri
vehicles to upgrade them to 1996 levels with
low-friction ball joints and improved inner
bushings. Dramatically improves impact harshness
qualities of vehicle and is recommended when
heavy-duty suspension components are added.
NOTE: The ball joint in the kit has been upgraded.
They have an improved nylon bearing to further
reduce impact harshness. (Since no measurable
wear could be detected after 250,000-miles of
fleet testing, the wear detectors were eliminated).
Kit includes LH and RH lower control arm
assemblies.
FRONT LOWER
CONTROL ARM KIT
M-3075-D
This kit enables owners of 1994-04 Mustangs
to upgrade to 2003 Cobra Mustang control arms.
The kit features 2 front lower control arm
assemblies with 50% stiffer front bushings and
low friction ball joints. This control arm has a
redesigned stamping to improve the turning circle
approximately 10% on 1994-98 Mustangs.
HD REAR TIE ROD END
M-5848-R00
• HD rear tie rod end with high temperature
boot that will withstand the temperatures
experienced at open track events
• Original equipment on 2000 Cobra “R”
• Fits 1999-04 Cobras
FRONT CONTROL ARM BUSHING KIT
M-3070-G1 1985-93 Mustang
M-3070-G2 1994-04 Mustang
These performance bushings provide immediate chassis
response allowing the enthusiast to maximize their
suspension tuning, whether it be for Drag, Road Racing
or Circle Track use.
• Low coefficient of drag assures quick
suspension reaction
• Easy-maintenance lubrication via grease fitting
M-3070-G1 shown
for quiet operation
• Moves lower control arm forward for increased positive caster without frame modifications.
Ideal for all performance applications
• Bushing design provides unique inner floating sleeve with separate thrust washers for
smooth control arm movement without deflection
HD REAR UPPER CONTROL ARM KIT
M-5500-A
Kit contains 2 upper control arms with bushings that are
approximately twice as stiff as current production bushings.
Significantly improves traction and handling when fitted to
1979-98 Mustang and 1993-98 Cobra V-8 models.
RACK AND PINION BUSHINGS
M-3716-G1 1986-04 Mustang
• Offset rack bushings are desirable when lowering
the vehicle’s ride height. These offset bushings
provide a more preferable steering geometry
at the new ride height
• Special indexing feature on bushing prohibits
rotation in the rack housing, eliminating the
possibility of rack slippage in the vehicle
HD FRONT TIE ROD END
M-3130-R00
• HD front tie rod end with high temperature boot
that will withstand the temperatures experienced
at open track events
• Original equipment on 2000 Cobra “R”
• Fits 1994-04 Mustangs
144 Tech “Hot Line” (586) 468-1356 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part.