2006 Ford Racing Performance Parts Catalog
2006 Ford Racing Performance Parts Catalog
2006 Ford Racing Performance Parts Catalog
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2003 MUSTANG MACH1 4.6L DOHC 4V ENGINE ASSEMBLY<br />
M-6007-M146**<br />
• Complete engine assembly from the dual bore throttle body to the oil pan<br />
• 305 HP @ 5800 RPM, 320 ft./lbs. of torque @ 4200 RPM<br />
• Great for high-tech street rods and custom built cars<br />
• Premium fuel required<br />
• Direct replacement for 2003 Mustang Mach 1 engine<br />
• Steel 8-bolt crankshaft<br />
• Calibration code 3G-301-AA<br />
See Also...<br />
• Crate Engine Build-Up<br />
• “Cammer Engine” Build-Up<br />
• Crate Engine Warranty<br />
• Engine Tips & Specs<br />
• Crate Engine <strong>Catalog</strong><br />
5.0L “CAMMER” MODULAR CRATE ENGINE ASSEMBLY<br />
M-6007-T50EA*<br />
The 5.0L DOHC 4-valve “Cammer” engine is an upgraded variant of the<br />
4.6L DOHC 4-valve Mustang Cobra engine, with numerous changes for<br />
improved power and durability. This engine is completely electronically<br />
managed. As part of the “Cammer” crate engine program, a stand-alone<br />
harness and engine management computer will be available separately.<br />
This will allow the engine to be used for many applications.<br />
With proper headers (not included) and low restriction air intake and<br />
vehicle exhaust systems, the engine will exceed 400 Bhp and have a very<br />
broad torque curve, peaking over 365 ft./lbs.<br />
Among the many features of the 5.0L Cammer are:<br />
• Variable geometry long/short runner, magnesium intake manifold<br />
assembly<br />
• All new <strong>Ford</strong> <strong>Racing</strong> 356 alloy aluminum block, specifically designed<br />
for this 5.0L engine program<br />
• <strong>Ford</strong> <strong>Racing</strong> high-flow cylinder heads<br />
• <strong>Ford</strong> <strong>Racing</strong> 12mm lift camshafts with unique valves, springs<br />
and rocker arms<br />
• High-strength racing connecting rods<br />
• Forged pistons with 11:1 compression ratio (nominal)<br />
• Complete with power steering pump, alternator<br />
and air conditioning compressor<br />
• Photo and specs may vary<br />
Did you know…<br />
The new <strong>Ford</strong> GT head is a derivative of the 2000 Cobra R head. Those same heads<br />
have been used on the Rough Rider off-road racing program to make nearly 700hp out of<br />
6 liters naturally aspirated!<br />
*Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part.<br />
This assembly is basically a package of the high-performance modular<br />
DOHC 4-valve components being offered in the <strong>Ford</strong> <strong>Racing</strong> <strong>Performance</strong><br />
<strong>Parts</strong> <strong>Catalog</strong>. These parts are currently in use as the core for a number of<br />
widely varying race engine applications. Modular 4.6L and 5.0L DOHC 4valve<br />
engines have been successfully used in drag racing, circle track and<br />
road racing. Further component development takes place on a continuous<br />
basis at <strong>Ford</strong> <strong>Racing</strong>, and will result in ever-expanding parts availability for<br />
this engine family.<br />
See Also... Crate Engine Build-Up<br />
“Cammer Engine” Build-Up<br />
Crate Engine Warranty<br />
Engine Tips & Specs<br />
Crate Engine <strong>Catalog</strong><br />
For additional modular engine applications, see www.fordracingparts.com<br />
www.fordracingparts.com 41<br />
CRATE<br />
ENGINES