2006 Ford Racing Performance Parts Catalog

STRUT TOWER BRACES
M-20201-A50 ➀ 1979-93 Mustang
These high quality steel strut tower braces stiffen 1979-1993 “Fox” Mustangs and are designed
to clear all production and many aftermarket components and accessories. These braces come
complete with all necessary fasteners and instructions. Braces are “E” coated and painted for
corrosion resistance. These kits are extremely competitively priced.
M-20201-A51 1994-95 Mustang
This brace kit is designed to work with the 1994-95 5.0L/302 Mustang only. It replaces the
production brace and allows installation of GT-40 induction system components. They have the
same features as the M-20201-A50 kit above.
M-20201-D46 Fits 1996-98 Mustang GT 4.6L SOHC
M-20201-E46 Fits 1996-98 Cobra 4.6L DOHC
M-20201-M46 Fits 1999-02 Mustang GT 4.6L SOHC
Easily bolts into original holes. Designed
to clear superchargers and Ford Racing
intake manifold M-9424-D46/E46.
NOTE:
➀ Will not fit 1979-85 Mustang
with dual snorkel air cleaner.
Must use Ford Racing
M-9600-A302 air
cleaner, or equivalent.
M-20201-A50 shown
2005-06 MUSTANG STRUT TOWER BRACE
M-20201-S197
• Fits 2005-06 Mustang GT
• Parallel beam design
for added rigidity
• Black powder coated
• Stainless steel Ford Racing
emblem
• Does not fit V-6
SUBFRAME CONNECTORS
M-5478-B ➀➄ Fits 1979-93 Mustang (Bolt-on Design)
M-5478-D ➁ Fits 1994-04 Mustang (Weld-on Design)
M-5478-J ➁➂➃ Fits 1979-04 Mustang (Weld-on Design)
• Strengthens chassis for extra traction
• Improves handling
NOTES: ➀ Nuts and bolts included (M-5478-B).
➁ Will not fit 1996-98 Cobra without modification.
➂ M-5478-J HD “Double-Cross” design distributes loads over more of the body structure.
➃ To use on convertible, must remove 3" from the front.
➄ Does not fit convertible.
M-5478-B shown
M-5478-J shown
*Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part.
460 FOX ENGINE SWAP
MOUNTS
M-6038-A460*
Use in 1979-95 Mustang and other Fox-chassis
cars to mount 429/460 engines. Our rubber
insulated mount kit is designed to work with
M-6675-A460 rear sump oil pan kit and
custom headers.
NOTE: Does not fit I-6 cylinder front
crossmember.
HEAVY DUTY #4
CROSSMEMBER
M-5030-F
• Developed on the Ford Racing 500 Mustang to
control movement of the pinion nose during
severe acceleration, deceleration and
cornering
• Fits 1999-01 Cobra Mustangs
SUBFRAME CONNECTOR
CROSS BRACE KIT
M-5480-A
• Distributes the load across more area by
doubling the mounting locations of the
subframe connectors
• Fits 1979-04 Mustangs when used with
subframe connector kits M-5478-B/D/K
Did you know…
The 2005 Mustang GT axles
are 31 spline.
www.fordracingparts.com 147
CHASSIS
COMPONENTS