XPP-721 Personal Pipettor GUI Software Operation Manual - FluidX

The Source Station for aspiration is on fixed Station 5 for 384 plates or 1536 plates, theTarget Stations for dispensing are fixed on Stations 1,2,3,4 for 96 plates or 384 plates,and the Wash Station for washing tips between each transfer action is also fixed onStation 6 for a 96 wash plate or 384 wash plate. 4in1 or 1to4 Reformat may also be donewithout a wash plate on station 6 if washing is not requiredo Input Airgap and aspirate Volume from Source plate.o Drag the Plunger Speed slider to set Aspirate and Dispense Plunger Speed.o Set Aspirate Depth and Dispense Depth by moving slider.o For small volume dispensing, use of the Side Tip Touch and Bottom Tip Touchfunctions are recommended.o To prevent tip contamination between each transfer, set “True” for Change Tips,pipettor will pause for changing pipetting head and continue action once resumekey is pressed.13) Define XYZ SpeedThe Define XYZ Speed function can modify X, Y or Z shuttle speed individually withina protocol if necessary, all commands in the protocol following the speed modification3