XPP-721 Personal Pipettor GUI Software Operation Manual - FluidX

o Depth: Drag the tip depth slider to set the Start Depth of tips in the wells of theplate on the pop-up depth slider bar or type in the numbers by keyboard. If the tipdepth slider position is not changed, the default depth is 50% (halfway into thewells).If variables have been set for depth by menu->Settings->Set Variable (seesection 12.2), to use variables for the value of the Depth, right click the value andselect the variable from the pop-up list.For incremental aspiration operation, change the Divided Steps value to begreater than 1 by select the step number from the pop-up step list or type in the2