Installing the BayStack 400-ST1 Cascade Module - CXtec

More documents

Recommendations

Info

For tabletop configurations, temporarily move units 1and 2 to allow space for units 5 and 6.1InUnit 1Unit 2Unit 32Out1 = Base unit32 = Last unit3 = Cascade cable (PN 303978-A)4 = Cascade max-return cable (PN 303979-A)Unit 44BS0041AFigure 14.Adding to Middle of Stack4. Add the new units in the desired location.For tabletop configurations, replace units 1 and 2(temporarily moved in Step 4).32
5. Reconnect the cascade cable from unit 2 to theCascade A In connector of (new) unit 5.6. Connect a cascade cable from the Cascade A Outconnector of unit 5 to the Cascade A In connectorof unit 6.7. Connect a cascade cable from the Cascade A Outconnector of unit 6 to the Cascade A In connectorof unit 3.8. Renumber the order of the units for the new stackconfiguration (if desired).You can renumber the unit numbers as described inyour switch’s User Guide.Adding Units to the End of a StackTo add one or more units to the end of a stack,complete the following steps:1. Determine the position of the new units in theexisting stack (Figure 15).For example, the shaded units (units 5 and 6) inFigure 15 show the two new units to be added to thestack. The new units are numbered as unit 5 and unit 6because they are additions to the end of an existingfour-unit stack.33
Page 1 and 2: Installing theBayStack 400-ST1Casca
Page 3 and 4: IntroductionThis guide shows how to
Page 5 and 6: You can obtain the latest updates t
Page 7 and 8: If any items are missing or damaged
Page 9 and 10: Cascade A OutCascade A InUnit 11Cas
Page 11 and 12: • Initial installation -- During
Page 13 and 14: • Stack MAC address -- The stack
Page 15 and 16: 1OutUnit 8Unit 7Unit 6Unit 5Unit 4U
Page 17 and 18: 1InUnit 1Unit 2Unit 3Unit 4Unit 5Un
Page 19 and 20: 1Unit 1Cascade A OutCascade A InUni
Page 21 and 22: Installing the 400-ST1 Cascade Modu
Page 23 and 24: BaseUnit SelectCascade A Out Cascad
Page 25 and 26: 5. Set the Unit Select switch for t
Page 27 and 28: . Connect the other end of the casc
Page 29 and 30: 2. Plug the other ends of the AC po
Page 31 and 32: Modifying an Existing StackConfigur
Page 33: Adding Units to the StackThis secti
Page 37 and 38: 4. Connect a cascade cable from the
Page 39 and 40: 2. Remove the cascade cable from th
Page 41 and 42: Upgrading the Switch FirmwareYour s

Installing the BayStack 400-ST1 Cascade Module - CXtec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?