6 - TiVo

Chapter 6Messages & Setup®By default, all TiVo DVRs andremote controls (inluding yourHUMAX DVD Recorder) have a RemoteAddress of “0” (zero). A remote controlwith a Remote Address of “0” will controlany TiVo DVR, even one with an assignedcode. A DVR or Recorder set to “0” willrespond to any remote control, even onewith an assigned code. This prevents youfrom becoming accidentally “locked out”of controlling your TiVo DVRs.Remote AddressManaging Multiple Recorders and RemotesIf you have more than one Recorder in your home, or if you have another model of TiVoDVR in addition to your HUMAX DVD Recorder, you can match a particular Recorderwith a particular remote so that each Recorder will only respond to its own remote. Youcan do this by setting the Remote Address.1. If both Recorders are in the same room, start by covering the IR sensor window on oneRecorder using a cloth or thick piece of paper. This will prevent setting the RemoteAddress on both Recorders simultaneously.2. Go to the System Information screen. First, press the TiVo button, then highlight andselect Messages & Setup, then System Information. On the System Informationscreen, scroll down until you see Remote Address.3. Hold down the PAUSE and TiVo buttons simultaneously for about five seconds (untilthe red light at the end of the remote control lights up and stays on when you releasethe buttons).4. Use the number keys to enter any digit from 1 to 9. Press the number you have chosenseveral times until you see the Remote Address change on the screen.5. Press the TiVo button to go to TiVo Central.6. Repeat these steps using your second Recorder and remote control. Be sure to choose adifferent number (in Step 4) for the remote address of the second Recorder.7. Once you complete this process, each remote will control only the Recorder to which itis assigned.100TiVo Central Messages & Setup Settings Remote Control & Recorder Front