6 - TiVo

Remote Control & Recorder FrontResetting the Programmable ButtonsIf you make a mistake, or are having difficulty, you can reset the programmable buttons(TV POWER, VOLUME, MUTE, TV INPUT, and the DVR SWITCH). All the remote'sbuttons will return to the unprogrammed state of a new remote.1. Prepare the remote control. Point the remote away from your Recorder and cover thefront end with your hand.Press and hold the TV POWER button and TiVo button simultaneously until the redlight at the end of the remote control comes on, remains steady, then stays on whenyou release the buttons.2. Press THUMBS DOWN three times, then press ENTER. (To cancel, press CLEARbefore you press ENTER.)Front Panel LightsYou can change the settings of the lights on the Recorder’s front panel.Recorder Front - Clock Light. You don’t have to set the clock on the front of theRecorder—the TiVo service sets it for you. (No more blinking “12:00”!). This setting letsyou dim or turn off the clock.Recorder Front - LED Lights. The Recorder has LED (light emitting diode) lights on itsfront panel to indicate when it is receiving power and when it is recording a program. Youcan choose to turn off these lights.Even if you choose to turn off the front panel lights, one of the LEDs on the front panelwill flash briefly when a button on the remote is pressed. This indicates that the Recorderis receiving a signal from the remote.6TiVo Central Messages & Setup Settings Remote Control & Recorder Front101