You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BAG D (Co<strong>nt</strong>inued)Figure 56122Step 15. Position the right rear arm (118) inside the rear pivot block(104) and line up the holes in the arm with the holes in the pivot. Slidea rear inner hinge pin (122) through the pivot block (104) and rear arm(118) all the way in u<strong>nt</strong>il the pin (122) rests against the set screw in thefro<strong>nt</strong> of the pivot block (104).Step 16. Repeat step 15 for the left rear arm (119).104122 118Figure 56Figure 573533 35 3833Step 17. Insert two 4-40 x 7/8" cap-head screws (33), one on eachside, through the outer holes in the top of the rear shock tower (123)from the fro<strong>nt</strong> side. Secure the screws (33) to the rear shock tower(123) by threading a 4-40 nut (35) over each screw (33) and tightening..Tip: Use the included Team <strong>Losi</strong> wheel wrench/nut-driver to securethe 4-40 nuts.Step 18. Thread a 3/8" ball stud (38) i<strong>nt</strong>o the ce<strong>nt</strong>er hole on each sideof the shock tower (123).12338Figure 5724
Change language