xxx-nt sport owner! - Losi

BAG EFigure 62126 128129Step 1. Place one shock O-ring (126) into the cartridge body (127),making sure that the O-ring (126) sits flat on the bottom of the cartridgebody (127).Step 2. Insert the cartridge spacer (128) into the cartridge body (127)followed by a second O-ring (126).Step 3. Once the second O-ring (126) is inserted, and is flush with thetop of the cartridge body (127), “snap” the cartridge cap (129) ontothe cartridge body (127).Step 4. Make four cartridge assemblies.*NOTE: Cartridges in some kits may be pre-assembled at thefactory.126127128Figure 62Figure 63130 131130 131Step 5. Place a drop of shock fluid (132) on the grooved end of eachshock shaft [front (130), rear (131)] and slide a cartridge, hex end first,down the shock shaft (130), (131) toward the threads.Figure 6327