Mini-Space Series Installation, Operation & Maintenance Manual
Mini-Space Series Installation, Operation & Maintenance Manual
Mini-Space Series Installation, Operation & Maintenance Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Mini</strong>-<strong>Space</strong> <strong>Series</strong> <strong>Installation</strong>, <strong>Operation</strong> & <strong>Maintenance</strong> <strong>Manual</strong>Air Technology Systems, Inc.Frederick, Maryland USA 21704Periodic General <strong>Maintenance</strong> Checks and Services ChecklistDate: ____________________________ Prepared By: ___________________________Model Number: ____________________________Item Number:____________________________Monthly__________________________Serial Number:Filters Blower Section Condensate Drain❏ Cleanliness ❏ Blower Turns ❏ Drain is Open❏ No Obstructions ❏ Belts (if applicable) ❏ Condensate Pan SafetySwitches Operate FreelyMiscellaneous❏ Check Glycol or Chilled Water for Air (bleed as required)❏ External Heat Exchanger Clean and Clear of ObstructionsHumidifier Cylinder and Controls Operate Properly❏Semi-Annually❏ Check Refrigerant Charge (bubbles in sight-glass) ❏ Tighten Electrical Connections❏ Check Suction & Discharge Pressure ❏ Check Contacts on Contactorsfor Pitting❏ Check Glycol Solution Concentration in System ❏ Clean Unit as Necessary❏ Clean Coils ❏ Test the Glycol SolutionInhibitors (fl ush if necessary)❏ Heat/Reheat <strong>Operation</strong>al ❏ Clean Condensate PumpRefrigerant SystemsAnnuallyChilled Water Systems❏ Inspect Glycol System for Leaks and Corrosion ❏ Inspect Chilled Water Systemfor Leaks and Corrosion❏ Conduct a Complete Check of All Services Listed ❏ Conduct a Complete Check ofAbove and Clean Unit's InteriorTelephone: (301) 620-2033Facsimile: (301) 620-1396All Services Listed Above andClean Unit's InteriorNotes: ___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________Signature:________________________________*** If factory assistance is required for any reason, provide the model number, serial number, and SATS itemnumber found on the unit nameplate. This will speed the process and ensure accuracy of information. ***(©April, 2008)A-2Air Technology Systems, Inc.
Change language