CABLES AND WIRES - Novkabel

ILAN 120 (ohm) HHalogen free installation cable for digital distribution up to 2 MbpsStandard: PSN (in arccodance with CENELEC-EN 50098-1 and CENELEC-EN 50098-2)Nominal voltage: up to 230 VCONSTRUCTIONConductor: soft annealed copper wire of 0.5 (mm) diameter.Insulation: foam-skin PE.Twisting elements: pairs.Screened pairs: two laminated aluminium foil with a copperdrain wire being longitudinally applied under it.Cable core: two or four screened pairs.Sheath: halogen-free, fire retardant polymer with low smokeemission in case of fire.APPLICATIONFor interconnection of digital multiplex equipment, digitaldistribution frames in transmission stations and for ISDN primarymultiplex connection ip to 2 Mbps.Cable do not spread flame (IEC 60332-3, method C).ELECTRICAL CHARACTERISTICSCharacteristic Unit ValueConductor resistance, max ohm/km 94Mutual capacitance, nom nF/km 45Insulation resistance, min G ohm km 5Characteristic impedance at 1 MHz ohm 120+12Capacitance unbalance, max. pair/screen pF/m 3.41 MHz dB/km 254 MHz dB/km 40Attenuation at10 MHz dB/km 6716 MHz dB/km 8120 MHz dB/km 92Crosstalk attenuation at near end dB 561 MHz, min. far end dB 61Dielectric strength wire/wire, 1 minute Veff 1000Operating voltage, peak value V 230161CONSTRUCTION DATAConstructionCu number Diameter Mass[kg/km] [mm] [kg/km]2x2x0.5 10 5.8 704x2x0.5 17 11.5 127Permissible environment temperatures:- at laying, from -5°C up to +50°C,- before and after laying, up to +70 0 C.