CABLES AND WIRES - Novkabel

PP/OInsulated overhead lineStandard: SRPS N.C3.315Nominal voltage: 500 VTest voltage:2 kVCONSTRUCTIONConductor: annealed copper wire or rope class 2, according toSRPS N.C0.015.Insulation: PVC compound.Core: cores are stranded together.Filler: no vulcanized rubber compound layer over the core.Supporting elementSupporting rope: rope consists of galvanized steel wire, whoseminimum tensile strength is 1300 N/mm 2 .Sheath: PVC compound layer which covers the core andsupporting rope.Sheath colour black.APPLICATIONIn the open air for public illumination (lamps caring is possible),for air household connections, site temporary connections, and soon. On pillars, support brackets or steel constructions. Installationwith the bearing conductor is made in accordance with theRegulation on technical standards for electrical installations of lowvoltage.CONSTRUCTION DATA188nxq n o xq oCu Height x width Mass Cu Height x widthnxq n o xq oMass[kg/km] [mm] [kg/km][kg/km] [mm] [kg/km]2x1,5 19x0,6 29 9,3x17,2 209 4x1,5 19x0,6 58 10,4x18,3 2532x2,5 19x0,6 48 10,5x19,4 256 4x2,5 19x0,6 96 11,9x19,8 3232x4 19x0,6 77 11,2x18,8 296 4x4 19x0,6 154 14,0x23,3 4422x6 19x0,6 115 12,6x21,6 360 4x6 19x0,6 230 15,2x24,5 5152x10 19x0,8 192 16,1x26,6 597 4x10 19x0,8 384 18,6x29,0 8002x16 19x0,8 308 19,3x29,6 863 4x16 19x0,8 614 22,3x32,6 11802x25 19x0,8 480 23,2x33,6 1234 4x25 19x1,0 960 27,4x39,9 18912x35 19x1,0 672 26,5x39,0 1660 4x35 19x1,2 1344 30,8x44,2 24763x1,5 19x0,6 43 9,7x17,6 227 5x1,5 19x0,6 72 11,2x19,0 2803x2,5 19x0,6 72 10,8x18,1 278 5x2,5 19x0,6 120 12,8x20,7 3643x4 19x0,6 115 12,5x20,4 365 5x4 19x0,6 192 15,2x24,5 5043x6 19x0,6 173 14,1x23,4 468 5x6 19x0,8 288 16,5x26,8 6723x10 19x0,8 288 17,2x27,5 729 5x10 19x0,8 480 20,3x30,6 9003x16 19x0,8 461 20,5x30,8 1027 5x16 19x1,0 768 24,9x36,6 15213x25 19x1,0 720 25,1x36,9 1572 5x25 19x1,2 1200 30,0x43,5 22813x35 19x1,0 1008 28,2x40,7 2004 5x35 19x1,2 1680 34,1x47,6 2963n – number of the wires, q – nominal cross section of the conductor, n o – number of the wires in supporting element,d o – diameter of the wire in supporting elementPermissible temperature of the conductor:- operating temperature (constant load), max +70°C,- in short circuit (max 5 s), max +160°C.Permissible environment temperature: at laying, from +5°C up to +50°C.