MY1B - SMC

Series MY1HTSide SupportSide support AMY-S63A2 x ø17.510.518.370100AB2 x ø11.5Side support BMY-S63B2 x M12 x 1.7518.370100ABDimensionsModelMY-S63 A BApplicable bore sizeMY1HT50MY1HT63A284304(mm)B314334∗ A set of side supports consists of a left supportand a right support.Guide for Side Support ApplicationFor long stroke operation, the cylindertube may be deflected depending on itsown weight and the load weight. In sucha case, use a side support in the middlesection. The spacing (l) of the supportmust be no more than the values shownin the graph on the right.Wlkg500400Caution1. If the cylinder mounting surfaces arenot measured accurately, using a sidesupport may cause poor operation.Therefore, be sure to level the cylindertube when mounting. Also, for longstroke operation involving vibrationand impact, use of a side support isrecommended even if the spacingvalue is within the allowable limitsshown in the graph.2. Support brackets are not for mounting;use them solely for providing support.lWWllMass m3002001000(450)(400)MY1HT50MY1HT63500 1000 1500mmSupport spacing l1050