MY1B - SMC

Mechanically Jointed Rodless CylinderLinear Guide TypeSeries MY1HSide SupportSide support AMY-SA2 x øGCDAB2 x øHFEMY1BMY1MSide support BMY-SB2 x JMY1CMY1HMY1HTCDABEMY1WMY2CMY2HModelMY-S10 ABMY-S16 ABMY-S20 ABMY-S25 ABMY-S32 ABMY-S40 ABApplicable bore sizeMY1H10MY1H16MY1H20MY1H25MY1H32MY1H40A537191105130145B61.681.6103.6119148167C121525354555D212638506480E3.64.96.4811.714.8F1.834568.5G6.56.589.51114∗ A set of side supports consists of a left support and a right support.H3.43.44.55.56.69(mm)JM4 x 0.7M4 x 0.7M5 x 0.8M6 x 1M8 x 1.25M10 x 1.5MY3AMY3BMY3MGuide for Side Support ApplicationFor long stroke operation, the cylindertube may be deflected depending on itsown weight and the load weight. In sucha case, use a side support in the middlesection. The spacing (l) of the supportmust be no more than the values shownin the graph on the right.Wlkg5040(600)(800)Caution1. If the cylinder mounting surfaces arenot measured accurately, using a sidesupport may cause poor operation.Therefore, be sure to level the cylindertube when mounting. Also, for longstroke operation involving vibrationand impact, use of a side support isrecommended even if the spacingvalue is within the allowable limitsshown in the graph.2. Support brackets are not for mounting;use them solely for providing support.lWWllMass m302010(100)MY1H10(550)(500)(450)MY1H20MY1H16MY1H25MY1H32MY1H40MY1H40D-0500 1000 1500Support spacingmml-XIndividual-X1037Technicaldata