STP 10-92A34-SM-TG Soldier's Manual and Trainer's ... - AskTOP

STP 10-92A34-SM-TGSupervise the Handling of Hazardous Materiel101-92A-3003Conditions: Assigned as a Material Management Supervisor at the Supply Support Activity (SSA)responsible for supervising the handling of hazardous materiel. Given protective clothing and equipment,TM 38-410, AR 200-1, and the unit internal and external standing operating procedures (SOPs), using adesktop computer serving as a file server with the Standard Army Retail Supply System (SARSS1)Materiel Release Order Control System (MROCS), Radio Frequency Automatic Identification (RFID),Automated Manifest System (AMS) equipment, and software installed and configured.Standards: Supervised the handling of hazardous materiel in accordance with TM 38-410 and AR 200-1.Performance Steps1. Identify the types of hazardous materiel. (Reference: TM 38-410, Chapter 2, Section II,paragraph 4)a. Identify explosives.b. Identify flammable and non-flammable liquid gases.c. Identify corrosive materiel.d. Identify poisonous materiel.e. Identify radioactive materiel.2. Verify that Material Safety Data Sheets (MSDSs) are on hand for each hazardous materiel stored.(Reference: TM 38-410, Chapter 2, Section II)3. Verify that personnel comply with the appropriate MSDS.(Reference: TM 38-410, Chapter 3, Section V, paragraph 3-10)a. Ensure label on containers have contents listed in the container.b. Ensure labels have accumulation date.4. Ensure that personnel select and wear the proper clothing and equipment when handling hazardousmateriel. (Reference: TM 38-410, Chapter 8, Section V, paragraphs 8.15 through 8.20)a. Ensure Soldiers know how to properly put on, adjust, wear, and remove the PersonalProtective Equipment (PPE).b. Ensure PPE has proper care and storage to increase limitations and life of the PPE.5. Ensure that storage guidelines and unit SOP are followed. (Reference: TM 38-410, Chapter 4,Section II, paragraphs 4.1 through 4.23)6. Establish procedures for the handling and storage of hazardous materiel. (Reference: TM 38-410,Chapter 4, Section II, paragraphs 4.1 through 4.23)a. Ensure containers are kept closed during storage, except when adding or removing waste.b. Ensure containers are in good condition to avoid any leaks/spillage.c. Ensure the containers are of appropriate size for the amount of waste to be stored.d. Ensure the container is compatible with the waste being handled/collected.7. Identify the procedures to contain the leakage/spill of a hazardous substance in accordance with theprocedures in the unit SOP. (Reference: TM 38-410, Chapter 2).8. Report the spill of hazardous substance to the required authorities. (Reference: TM 38-410,Chapters 2, 4, and 5).Evaluation Preparation: At the test site, provide all materials that are relevant to the task to includethose mentioned in the Conditions statement.3-4 7 May 2008