<strong>STP</strong> <strong>10</strong>-<strong>92A34</strong>-<strong>SM</strong>-<strong>TG</strong>Supervise the H<strong>and</strong>ling of Hazardous Materiel<strong>10</strong>1-92A-3003Conditions: Assigned as a Material Management Supervisor at the Supply Support Activity (SSA)responsible for supervising the h<strong>and</strong>ling of hazardous materiel. Given protective clothing <strong>and</strong> equipment,TM 38-4<strong>10</strong>, AR 200-1, <strong>and</strong> the unit internal <strong>and</strong> external st<strong>and</strong>ing operating procedures (SOPs), using adesktop computer serving as a file server with the St<strong>and</strong>ard Army Retail Supply System (SARSS1)Materiel Release Order Control System (MROCS), Radio Frequency Automatic Identification (RFID),Automated Manifest System (AMS) equipment, <strong>and</strong> software installed <strong>and</strong> configured.St<strong>and</strong>ards: Supervised the h<strong>and</strong>ling of hazardous materiel in accordance with TM 38-4<strong>10</strong> <strong>and</strong> AR 200-1.Performance Steps1. Identify the types of hazardous materiel. (Reference: TM 38-4<strong>10</strong>, Chapter 2, Section II,paragraph 4)a. Identify explosives.b. Identify flammable <strong>and</strong> non-flammable liquid gases.c. Identify corrosive materiel.d. Identify poisonous materiel.e. Identify radioactive materiel.2. Verify that Material Safety Data Sheets (MSDSs) are on h<strong>and</strong> for each hazardous materiel stored.(Reference: TM 38-4<strong>10</strong>, Chapter 2, Section II)3. Verify that personnel comply with the appropriate MSDS.(Reference: TM 38-4<strong>10</strong>, Chapter 3, Section V, paragraph 3-<strong>10</strong>)a. Ensure label on containers have contents listed in the container.b. Ensure labels have accumulation date.4. Ensure that personnel select <strong>and</strong> wear the proper clothing <strong>and</strong> equipment when h<strong>and</strong>ling hazardousmateriel. (Reference: TM 38-4<strong>10</strong>, Chapter 8, Section V, paragraphs 8.15 through 8.20)a. Ensure Soldiers know how to properly put on, adjust, wear, <strong>and</strong> remove the PersonalProtective Equipment (PPE).b. Ensure PPE has proper care <strong>and</strong> storage to increase limitations <strong>and</strong> life of the PPE.5. Ensure that storage guidelines <strong>and</strong> unit SOP are followed. (Reference: TM 38-4<strong>10</strong>, Chapter 4,Section II, paragraphs 4.1 through 4.23)6. Establish procedures for the h<strong>and</strong>ling <strong>and</strong> storage of hazardous materiel. (Reference: TM 38-4<strong>10</strong>,Chapter 4, Section II, paragraphs 4.1 through 4.23)a. Ensure containers are kept closed during storage, except when adding or removing waste.b. Ensure containers are in good condition to avoid any leaks/spillage.c. Ensure the containers are of appropriate size for the amount of waste to be stored.d. Ensure the container is compatible with the waste being h<strong>and</strong>led/collected.7. Identify the procedures to contain the leakage/spill of a hazardous substance in accordance with theprocedures in the unit SOP. (Reference: TM 38-4<strong>10</strong>, Chapter 2).8. Report the spill of hazardous substance to the required authorities. (Reference: TM 38-4<strong>10</strong>,Chapters 2, 4, <strong>and</strong> 5).Evaluation Preparation: At the test site, provide all materials that are relevant to the task to includethose mentioned in the Conditions statement.3-4 7 May 2008
<strong>STP</strong> <strong>10</strong>-<strong>92A34</strong>-<strong>SM</strong>-<strong>TG</strong>Performance Measures GO NO-GO1. Identified the types of hazardous material. —— ——2. Verified that Material Safety Data Sheets (MSDSs) are on h<strong>and</strong> for eachhazardous materiel stored.—— ——3. Verified that personnel comply with the appropriate MSDS. —— ——4. Ensured that personnel selected the proper clothing/equipment to be used duringh<strong>and</strong>ling procedures.—— ——5. Ensured that storage guidelines <strong>and</strong> unit SOP are followed. —— ——6. Established procedures for h<strong>and</strong>ling <strong>and</strong> storage of hazardous material. —— ——7. Identified the procedures to contain the leakage/spill of hazardous substance inaccordance with the procedures in the unit SOP.—— ——8. Reported the spill of a hazardous substance to the required authorities. —— ——Evaluation Guidance: Score the Soldier GO if all performance measures are passed. Score the SoldierNO-GO if any performance measure is failed. If the Soldier scores a NO-GO, show the Soldier what wasdone wrong <strong>and</strong> how to do it correctly.ReferencesRequiredRelatedAR 200-1 FM 38-700FEDLOG (EM 0007) SB 3-30TM 38-4<strong>10</strong>7 May 2008 3-5