BSL PRO 4 Manual - Biopac

110 BSL PRO Manual5. Check “Use calibration”, “Require calibration prior to acquiring data” and choose “Singlepoint” as the Calibration type.6. Enter the desired “prompt” text. For example,“Make sure no air is flowing through the transducer and click "Calibrate".”7. Click OK and exit the “Input Channel Parameters” dialog.8. With the SS11LA held upright, click the Start button. The single prompt will appear:The recording should show 0 liters/second with no air flowing through the transducer.Visit the online support center at www.biopac.com