BSL PRO 4 Manual - Biopac

Part C — Analysis Functions 2792. Select Find Cycle. (Locate cycles from peaks).3. Enable “Use selected maximum” on the Cycles/Peaks tab to automatically set an appropriate thresholdvalue based on the amplitude of the cycle detector.4. Click the Output tab and choose the desired option(s), such as paste measurement controls to update thejournal with the measurement values from the new peak.5. Click a Find button. Find first cycle – the cursor will blink at the first cycle point To manually move through the file, click Find next Or, select an area and choose Find all or Find in selected area. Or, place the cursor in the data and Find all will detect cycles from that point forward. Find all cycles will find all cycles from the beginning of the selected area to the end of the waveform. Find in selected area will only find cycles in the selected area.To use an offsetUse the Selection controls to set a time window around the selected cycle; previous peak controls the leftedge, Current peak has options to control the left and right edges.1. Use steps 1-4 above.2. Click the Selection tab.3. Set the desired edge values. For example, to set the time window 0.5 seconds prior to the previous peak.To control the left and right edges, select current peak and enter the appropriate time window to define aninterval around the cycle.BSL PRO Manual