BSL PRO 4 Manual - Biopac

160 BSL PRO ManualVoltage Output ControlThe Voltage Output Control is used to output a voltage level (DC voltage) via the Analog Out port on theback of the MP35 to control another piece of equipment.Note: This option is not available in MP36 or MP45 hardware.To use this control panel:Choose MP35>Output Control>Voltage to open the Voltage Output Control panel.Enter a value manually, or use the scroll or arrow buttons to increase or decrease values.When using the scroll box, a change will not occur on the output until the mouse button is released.The display shows the value that is to be output. If an entry exceeds the voltage range limits of the MPAcquisition Unit, the value automatically rounds to the nearest obtainable value.MP35 Voltage OutputRangeResolution0 - 4.096 Volts1 mVoltThere are no Preferences for the Voltage Output Control.When multiple graph windows are open, Voltage Output stops (goes to 0 Volts) if the graphs are switchedand the new active graph contains its own Output Control panel. When the graph containing the VoltageOutput Control panel is made active again, Voltage Output goes back to the previously set level.Visit the online support center at www.biopac.com