Model 735 Intelligent Display User's Manual - Paroscientific, Inc.

More documents

Recommendations

Info

2.5.2 Model 745Figure 3. Model 745 rear panelThe Model 745 rear panel contains the following features:• Pressure port(s)• AC adapter jack• Power and I/O terminal block• RS-232 port• Battery compartment• Chassis grounding lugPlease refer to paragraph 4.2 for detailed information about the Model745 rear panel features.GETTING FAMILIAR 2-5
3 Quick StartThis section will help you to quickly set up the Model 735/745 and begintaking pressure measurements.3.1 Model 745Step 1: Apply power to the Model 745Refer to paragraph 4.2.1 for detailed information.Step 2: Turn Model 745 onPress the ON/OFF key to turn on the Model 745. After a shortinitialization, the Model 745 will begin to display pressuremeasurement values.Your Model 745 should now be displaying correct pressuremeasurement values. If the displayed values are not correct, refer toSection 13 for troubleshooting tips.Refer to Section 4 for information about configuring your Model 745according to your application.3.2 Model 735Step 1: Connect an external Digiquartz® pressuretransducer to the Model 735• Refer to paragraph 18.1 for detailed information.Step 2: Apply power to the Model 735• Refer to paragraph 4.2.1 for detailed information.Step 3: Turn Model 735 on• Press the ON/OFF key to turn on the Model 735. After ashort initialization, the Model 735 will begin to displaypressure measurement values.Note: If the Model 735 has not yet been configured with thecalibration coefficients of the particular Digiquartz® pressuretransducer to which it is connected, incorrect pressuremeasurement values will be displayed and the overpressure alarmmay sound.QUICK START 3-1
Page 2 and 3: TABLE OF CONTENTSPage #1 INTRODUCTI
Page 4 and 5: 6 NANO-RESOLUTION FEATURES & FUNCTI
Page 6: 1 IntroductionThank you for your pu
Page 10 and 11: RDigiquartz® pressure transducer,
Page 14 and 15: Step 4: Establish communications be
Page 16 and 17: CAUTION PF must be set to the full-
Page 18: GAUGE UNITSUnits equipped with gaug
Page 21 and 22: • When in a parameter entry scree
Page 23 and 24: • Pressure Rate - displays the pr
Page 25 and 26: 4.2 Rear Panel4.2.1 Power OptionsTh
Page 27 and 28: 5 Remote Operation5.1 Local vs. RS-
Page 29 and 30: 5.3 Command and Response BasicsThe
Page 31 and 32: Where: * = Start character Asterisk
Page 33 and 34: 5.6 Setting and Reading Parameter V
Page 35 and 36: Q1Sample and send one temperature p
Page 37 and 38: 5.7.1.3 Continuous Measurement Comm
Page 39 and 40: PSSet or read the temperature measu
Page 42: TIME-BASED INTEGRATION TIME COMMAND
Page 45 and 46: Note:When MD is set to a non-zero v
Page 47 and 48: UFTUSet or read the user-defined pr
Page 49 and 50: ZVSet or read the tare value.Action
Page 51 and 52: USSet or read the engineering units
Page 53 and 54: DLSet or read the fixed field data
Page 55 and 56: MNRead the model number.Action: The
Page 57 and 58: PLRead the overpressure indication
Page 59 and 60: Note: The value of PA is entered in
Page 61 and 62: CXCheck timebase crystal frequency.
Page 63 and 64:
5.9.1 Networking BasicsWhen setting
Page 65 and 66:
5.10 Displaying Data Remotely with
Page 67 and 68:
6.2 Enabling Nano-ResolutionNano-re
Page 69 and 70:
6.4 Configuring FIR Filter ModeSETT
Page 71 and 72:
6.5 Default Numeric Formats for IIR
Page 73 and 74:
7 Pressure Measurement Concepts7.1
Page 75 and 76:
PRESSURE AND TEMPERATURE PERIODMEAS
Page 77 and 78:
7.6 Resolution, Integration Time an
Page 79 and 80:
P4 Command (Continuous Pressure Out
Page 81 and 82:
7.7 High Speed SamplingSee paragrap
Page 83 and 84:
8 Accessories8.1 Included Accessori
Page 85 and 86:
9 MaintenanceThe Model 735/745 does
Page 87 and 88:
a transducer is carefully adjusted
Page 89 and 90:
11 WarrantyParoscientific highly va
Page 91 and 92:
12 Service and SupportTechnical sup
Page 93 and 94:
MODEL 735/745 DISPLAYS “DISPLAY D
Page 95 and 96:
14 “Display Data Interrupted” M
Page 97 and 98:
16 GlossaryThe following is a list
Page 99 and 100:
17.2 PC RS-232 Port ConnectorPin as
Page 101 and 102:
18 Wiring Diagrams18.1 Connecting D
Page 103 and 104:
Figure 7. Serial loop network wirin
Page 105 and 106:
19 How do I …?1. How do I configu
Page 107 and 108:
21 Command and Parameter ReferenceC
Page 109 and 110:
NOTES
show all

Model 735 Intelligent Display User's Manual - Paroscientific, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?