User's Manual C - Accu-Chek

More documents

Recommendations

Info

16Symbols, messages, problems and error messagesTemperature too low / too high: This message appearsat the start of a test if the ambient temperatureor the temperature of the meter is between +8 and+10 °C or between +40 and +42 °C.use , to select whether you wish to Test or Quit. Test: in this case, the meter advances a test area. Quit: in this case, the meter returns to the Mainmenu. Close the tip cover.If you decide to perform the test in spite of the warning,the result will be flagged and saved with the symbol.do not use blood glucose results obtained followingthese warnings as a basis for making therapeuticdecisions. These results may be incorrect.Incorrect results can cause the wrong therapyrecommendation to be made and thus produceserious adverse health effects. Move to a placewhere the temperature is between +10 and+40 °C and wait for the temperature of the meterto adjust to this temperature.226
Symbols, messages, problems and error messages 16Reminder: If you have set reminders, this messageappears at the set time. If you have also turned onReminders in the Settings/Tones menu, beeps will alsosound.To turn off the reminder:Press any button.227
Page 1 and 2:
BLOOD GLUCOSE MONITORING SYSTEMMC©
Page 3 and 4:
Intended useIntended useAccu‐Chek
Page 5 and 6:
About this user’s ManualPlease no
Page 7 and 8:
Contents2.3 Inserting the first tes
Page 9:
Contents4.7 Setting the volume ....
Page 13 and 14:
Getting to know your meter and lanc
Page 15 and 16:
Page 18 and 19:
1Getting to know your meter and lan
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
2Initial steps before testing2.2 Ch
Page 42 and 43:
2Initial steps before testing1 Plac
Page 44 and 45:
2Initial steps before testing5 Remo
Page 46 and 47:
2Initial steps before testingValidi
Page 48 and 49:
2Initial steps before testing2.4 Re
Page 50 and 51:
2Initial steps before testing1 With
Page 52:
2Initial steps before testingThe me
Page 56 and 57:
3Testing blood glucoseThe lancing d
Page 58 and 59:
3Testing blood glucose3 Insert the
Page 60 and 61:
3Testing blood glucoseLoading a new
Page 62 and 63:
3Testing blood glucoseUndocking and
Page 64 and 65:
3Testing blood glucose3.2 Performin
Page 66 and 67:
3Testing blood glucoseStarting a bl
Page 68 and 69:
3Testing blood glucoseyou can also
Page 70 and 71:
3Testing blood glucose4 Place your
Page 72 and 73:
3Testing blood glucoseTo obtain blo
Page 74 and 75:
3Testing blood glucoseApplying the
Page 76 and 77:
3Testing blood glucoseTurning off t
Page 78 and 79:
3Testing blood glucoseAlternate sit
Page 80 and 81:
3Testing blood glucoseAlternate Sit
Page 82 and 83:
3Testing blood glucose3 Rotate the
Page 85 and 86:
Testing blood glucose 313 Pick up t
Page 87 and 88:
Testing blood glucose 3Flagging res
Page 89 and 90:
Testing blood glucose 3The followin
Page 91 and 92:
Testing blood glucose 3Leaving the
Page 93 and 94:
Testing blood glucose 33.3 Evaluati
Page 95 and 96:
Adjust settings 44Adjust settings4.
Page 97 and 98:
Adjust settings 4Menu Setting Avail
Page 99 and 100:
Adjust settings 4The following opti
Page 101 and 102:
Adjust settings 4Setting the time1
Page 103 and 104:
Adjust settings 424-hour format 12-
Page 105 and 106:
Adjust settings 4The following exam
Page 107 and 108:
Adjust settings 4Selecting the time
Page 109 and 110:
Adjust settings 44.4 Setting tonesT
Page 111 and 112:
Adjust settings 4Turning the beeper
Page 113 and 114:
Adjust settings 44.5 Setting remind
Page 115 and 116:
Adjust settings 4Setting a new remi
Page 117 and 118:
Adjust settings 424-hour format 12-
Page 119 and 120:
Adjust settings 4you will then see
Page 121 and 122:
Adjust settings 4Changing a reminde
Page 123 and 124:
Adjust settings 4Cancel - Not editi
Page 125 and 126:
Adjust settings 4The meter displays
Page 127 and 128:
Adjust settings 4In the case of a o
Page 129 and 130:
Adjust settings 4Setting a target r
Page 131 and 132:
Adjust settings 4Editing an existin
Page 133 and 134:
Adjust settings 4Changing a target
Page 135 and 136:
Adjust settings 44.7 Setting the vo
Page 137 and 138:
Adjust settings 44.8 Setting the br
Page 139 and 140:
Adjust settings 44.9 Setting the la
Page 141 and 142:
Adjust settings 4Correcting a wrong
Page 143 and 144:
using the meter as a diary 55.1 Ret
Page 145 and 146:
using the meter as a diary 5Via the
Page 147 and 148:
using the meter as a diary 5display
Page 150 and 151:
5using the meter as a diary2 use to
Page 152 and 153:
5using the meter as a diaryiiThe me
Page 154 and 155:
5using the meter as a diarydependin
Page 156 and 157:
5using the meter as a diaryStarting
Page 158 and 159:
5using the meter as a diaryTransfer
Page 160 and 161:
5using the meter as a diaryTransfer
Page 162 and 163:
5using the meter as a diary1 Turn o
Page 164 and 165:
5using the meter as a diaryIf the t
Page 166 and 167:
5using the meter as a diary1 Turn o
Page 168 and 169:
66Acoustic modeAcoustic modeThe pro
Page 170 and 171:
6Acoustic mode6.1 Beep tone when tu
Page 172 and 173:
6Acoustic modeFirst the tens are an
Page 174 and 175:
6Acoustic mode6.5 Announcements of
Page 176 and 177: 7Checking the meter7.1 Preparing fo
Page 178 and 179: 7Checking the meterA beep will soun
Page 180 and 181: 7Checking the meteryou can hold the
Page 182 and 183: 7Checking the meter10 use to select
Page 184 and 185: 7Checking the meterThe meter return
Page 186 and 187: 7Checking the meterControl test not
Page 188 and 189: 8 Tools menu8 Tools menuThe Tools m
Page 190 and 191: 9Performing a display check3 Check
Page 192 and 193: 11 Cleaning the meter and lancing d
Page 194 and 195: 11Cleaning the meter and lancing de
Page 197 and 198: Cleaning the meter and lancing devi
Page 203 and 204: Replacing the test cassette 1212Rep
Page 205 and 206: Replacing the test cassette 1212.2
Page 207 and 208: Replacing the test cassette 124 ope
Page 209 and 210: Replacing the test cassette 128 Clo
Page 211 and 212: Viewing the number of available tes
Page 213 and 214: Changing the batteries 14Results an
Page 215 and 216: Changing the batteries 143 Turn the
Page 217 and 218: Testing and storage conditions 1515
Page 219 and 220: Testing and storage conditions 1515
Page 221: Symbols, messages, problems and err
Page 224 and 225: 16Symbols, messages, problems and e
Page 236 and 237: 1717disposing of the meterDisposing
Page 238 and 239: 1818Technical dataTechnical dataMet
Page 240 and 241: 18Technical dataElectromagneticcomp
Page 242 and 243: 20 Accu-Chek Customer Care20 Accu
Page 244 and 245: 21Alphabetical indexCchecking, mete
Page 246 and 247: 21Alphabetical indexmeterchecking 1
Page 248 and 249: 21Alphabetical indextestperforming
Page 250 and 251: 22 Menu overview22 Menu overviewMai
Page 252 and 253: 2522323explanation of symbolson the
show all

User's Manual C - Accu-Chek

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?