Akai MPC-3000 v3.0 Owners Manual.pdf - Fdiskc

Chapter 7: The MIXER/EFFECTS KeyViewing the Mix Data in Text FormThe graphic screens for the stereo mixer and individual outputs/effects mixer (menu options 1 and 2) are normally used for theadjusting the stereo mix and individual outputs/effects mix. However,an additional screen containing the same data in text form isalso provided. You can access it by pressing the MIXER/EFFECTSkey and selecting option 3. The following screen will appear:================ Mixer =================Note:64/A01-Sound_name(ST)--- Stereo Out --- ---- Indiv Out ----Volume:100Volume:100Pan:50LOutput select:EFCTFollow ster vol:YES========================================This alternate view is useful when adjusting mix data for notenumbers within the active program that are not currently assignedto a pad. This would be the case when you’re playing sounds fromthe MIDI input only. Also, one mix parameter, Follow stervol(Follow stereo volume), only appears in this screen.The fields and soft keys are:• The Note field:A unique set of mix data values exists for each of the 64 MIDI notenumbers (35-98) in the active program. The mix values shown in thecenter area of the screen apply only to the MIDI note numberselected in this field. For convenience, the pad number and soundcurrently assigned to the selected note number are shown to itsright. A new note number may be entered either (1) by cursorediting, (2) by pressing a front panel pad (the note number assignedto that pad will be selected automatically), or (3) by sending a noteto the MIDI input (the received note number will be selected automatically).The Stereo Out section:• The Volume field:This is the volume for the selected sound at the stereo outputs. Therange is from 0 to 100. This is the same parameter set by thegraphic volume slider in the Stereo Mix screen.Page 139