Akai MPC-3000 v3.0 Owners Manual.pdf - Fdiskc

Chapter 9: Saving to and Loading from Disk• The Disk field:This field only appears if a hard disk is connected to the SCSI port.It shows the active disk device, either the floppy drive or one of thehard disk partitions. It is for display only and cannot be edited. Tochange from floppy disk to hard disk or vice versa, you must press.• The soft key:Pressing this soft key loads the selected file. Instructions for loadingvarious file types are given in the following sections.• The soft key:Press this soft key to erase the selected file from the disk. Anadditional screen will appear asking you to confirm the erasure.• The soft key:To rename the selected file, press this soft key. The following screenwill appear:============ Rename a File =============Rename the file: FILENAME.PGMTo the new name: FILENAME========================================To rename the file, enter the new name in the lower field in thesame manner as you would change the Sequence Name field in thePlay/Record screen, then press the soft key.• The soft key:This soft key only appears if a hard disk is connected to the SCSIport. It is used to change the active disk device from the floppy driveto one of the hard disk partitions or vice versa. If is pressed, the following screen appears:============== Select Disk =============Select disk, then press toreturn to previous screen.Disk:HARD DISK PART A========================================Page 174