Akai MPC-3000 v3.0 Owners Manual.pdf - Fdiskc

Chapter 9: Saving to and Loading from DiskTo select a different disk device, choose it in the Disk field, thenpress the soft key. The options are:FLOPPY DISKHARD DISK PART AHARD DISK PART BHARD DISK PART C(and other hard disk partitions if they exist)When is pressed, the previous screen will beredisplayed and the selected disk device will be active.Loading a SEQ File (Single Sequence)If a SEQ file is selected and is pressed, you’ll see thefollowing screen, in which you are asked which sequence number toload the sequence into:===== Load a Sequence file (.SEQ) ======Load into sequence:02-Sequence_name___========================================Select the sequence number to load the file into, then press.If the file is an MPC60 version 1 or 2 SEQ fileIf the SEQ file is a MPC60 version 2 file, additional screens arepresented:=========== Load V2 SEQ File ===========Each drum notes pad assignment must beconverted to a MIDI note number usingthe editable table in the next screen.To standardize note-to-instrumentassignments, use general MIDI numbers.========================================After pressing :Page 175